Seagate LM series hard drives, such as 8C（LM035), A5（LM048) etc., due to some specific technical reasons of them, once the operation of recalculating translator is done, it will lead to malfunction of user sector access interruption. There is no way

Full Support for Seagate LM Series There are more and more Seagate hard drives with firmware lock. The so-called firmware lock is that the hard drives can get access to T-level, it can execute a few commands to view hard drives' information, but can

Solutions to Seagate Sector Access Interruption (Part Two) Video download link： http://us.mrtlab.com/video/sgtsectinter.rar In Solutions to Seagate Sector Access Interruption (Part One), we've demonstrated how to manually make a sector access inte

Solutions to Seagate Sector Access Interruption (Part One) Video download link: http://us.mrtlab.com/video/sgtsecinter.rar Sector access interruption is a common problem in F3 series of Seagate drives. When scanning, we can normally read out the da

Sector access interruption of Seagate drives is a hard nut to crack in data recovery industry with a high probability of occurrence, but if we want to repair it, it will be time-consuming and the success rate is low. Compared to other malfunctions o

It is through heads that we can read and write data within hard disks. But long time usage or any impact of uncertain factors (such as wobbling the disk when it is running) might damage the heads, and will lead to long time busy or no response status

No HOST FIS-ReadyStatusFlags is one of the most common malfunctions among Seagate F3 hard drives When No HOST FIS-ReadyStatusFlags error occurs, usually the disk can not be ready and will continuously keep BUSY. There are many reasons that can lea

Analysis and solutions of Init SMART fail First all of, let's get a general understanding of SMART. SMART is short for self-Monitoring, Analysis and Reporting Technology. It is one automatic status detection and early warning system and specificatio