MRT WH software data recovery tools and Video tutorials download

MRT WH is a software product which developed by MRT firmware laboratory in 2009, it was costs 4,000 RMB and now it is used for MRT’s expansion tool integrated software provides to MRT Pro users for free. MRT WH is mainly deal with HDD firmware, it is a software – only product. It is a data recovery and firmware repair tool.

MRT WH software download address: https://us.mrtlab.com/download/

After download, it is a zip file named MrtWH.rar, please decompress it in any folder in the local and then open the MrtWH folder. There are a lot of files and you should run the executable file named Mrt.exe, in this way you could start MRT WH.

Before used MRT WH, please start the main program MRT Pro firstly, only after start the main program MRT Pro starts, MRT WH could start. For the users of Windows7, it has UAC security mechanism and it may led MRT WH unable to started. The solution: 1. Close Win7’s UAC in control panel and then restart computer. 2. Use administrator to run MRT Pro main program and MRT WH program.

We prepare the MRT WH video tutorials, please click here to download:

Primary video tutorials: https://info.mrtlab.com/video/Mrt-WH-tech.rar

Senior video tutorials (about 177MB): https://info.mrtlab.com/video/techvdo/mrtwhvod.rar

Instructions for use and user manual: https://info.mrtlab.com/mrtbook/mrtwhbook.rar

Addendum:

The main functions of MRT WH:

Introduction of WD repair functions:

MAVELL ROYL ( triangle) series:
1) The procedure could load system parameters automatically.
2) Display directly and read firmware normally in the version after PCI－PC3000　2.27.
3) PCI supports conversion firmware, generate module lists and track lists.
4) PCI supports read and write module and track when HDD can not be identified.
5) View the track which the modules belong to and address which the track is at.
6) Track test and module test.
7) Changing module address.
8) Import and export module, uniting tracks by modules operating.
9) Discretionarily Kill head, meanwhile auto modify SA defects and data adapter.
10) Generate ZONE 03 module.
11) Kill section
12) Edit ID, modify firmware version
13) Clear SMRAT and clear defects of the translator
14) Edit defects table, clear P-list and G-list.
15) Remove defective head.
16) Generate ROM and ROM modules from modules.
17) Distill the ROM module, Unites the ROM module
18) Open ROM list.
19) Kill ROM head, meanwhile ROM module adapter.
20) View and edit ROM SA defects
21) Launching the self-calibration and modify log.

MAVELL (L board) series:
1) Display directly and edit revised modules
2) Module test.
3) Changing module address.
4) Adjust adapters, loading ROM adapter and exterior adapter at same time.
5) Kill section
6) Edit ID, revise firmware version
7) Clear SMRAT and clear defects of the translator
8) Edit defects table, clear P-list and G-list
9) Remove defective head

10) Open ROM list.
11) Generate ROM-47 from modules
12) Kill ROM head, meanwhile auto modify ROM modules adapter.
13) Generate adapt ROM from firmware, meanwhile auto modify ROM modules adapter and head map.
14) Launching the self-calibration and modify log.

Introduction of Hitachi functions:
1) Loading series of parameters automatically.
2) View the start address of data area
3) Discretionarily Kill head, meanwhile auto modify SA defects and data adapter.

4) Generate original ZONE modules
5) Quickly generate adaptation data for NV－ROM.
6) Edit ID, revise LBA content.
7) Clear up P-list and G-list.

<< USB to serial port adapter driver (CP210x driver) >>MRT Pro data recovery software downloads

Check all comments