Video presentation – MRT-WH Hitachi repair software video tutorials


MRT history products — Video tutorials of MRT WH version’s usage

MRT WH is a pure software version tools, it can write firmware into HDDs with the help of PC3000.

At present MRT has been published the latest products — MRT Pro, with the hardware card, operate HDD firmware alone and needn’t the help of PC3000.

MRT WH video tutorials package, please click the follow link to download it:  http://info.mrtlab.com/video/Mrt-WH-tech.rar 

 

Function introduction

MAVELL ROYL ( triangle) series:
1) The procedure could load system parameters automatically.
2) Display directly and read firmware normally in the version after PCI-PC3000 2.27.
3) PCI supports conversion firmware, generate module lists and track lists.
4) PCI supports read and write module and track when HDD can not be identified.
5) View the track which the modules belong to and address which the track is at.
6) Track test and module test.
7) Changing module address.
8) Import and export module, uniting tracks by modules operating.
9) Discretionarily Kill head, meanwhile auto modify SA defects and data adapter.
10) Generate ZONE 03 module.
11) Kill section
12) Edit ID, modify firmware version
13) Clear SMRAT and clear defects of the translator
14) Edit defects table, clear P-list and G-list.
15) Remove defective head.
16) Generate ROM and ROM modules from modules.
17) Distill the ROM module, Unites the ROM module
18) Open ROM list.
19) Kill ROM head, meanwhile ROM module adapter.
20) View and edit ROM SA defects
21) Launching the self-calibration and modify log.
 

MAVELL (L board) series:
1) Display directly and edit revised modules
2) Module test.
3) Changing module address.
4) Adjust adapters, loading ROM adapter and exterior adapter at same time.
5) Kill section
6) Edit ID, revise firmware version
7) Clear SMRAT and clear defects of the translator
8) Edit defects table, clear P-list and G-list
9) Remove defective head
10) Open ROM list.
11) Generate ROM-47 from modules
12) Kill ROM head, meanwhile auto modify ROM modules adapter.
13) Generate adapt ROM from firmware, meanwhile auto modify ROM modules adapter and head map.
14) Launching the self-calibration and modify log.
 

Introduction of Hitachi functions:
1) Loading series of parameters automatically.
2) View the start address of data area
3) Discretionarily Kill head, meanwhile auto modify SA defects and data adapter.
4) Generate original ZONE modules
5) Quickly generate adaptation data for NV-ROM.
6) Edit ID, revise LBA content.
7) Clear up P-list and G-list.
 
Domain name: www.mrtlab.com | | Telephone: +86-27-82621261 | Terms of use
MRT data recovery website,provides professional HDD firmware repair and data recovery technical resources!
Copyright 2003-2019 Powered By MrtLab