（Publicity image）

（Actual photo）

Today, the brand-new MRT Ultra 3.0 six-port card is officially released, redefining the standard of professional data recovery hardware with six SATA 3.0 interfaces, a graphics-card-level power architecture, and an intelligent monitoring system. Firmware read and write efficiency reaches new heights, and the ability to handle multiple disks concurrently achieves a qualitative leap, injecting ultimate combat power into the data rescue battlefield!

(Back side)

Technical Innovation: From "Adequate" to "Extreme"

The MRT Ultra 3.0 is equipped with a high-performance main control chip and adopts the PCIe 3.0 protocol, integrating an upstream PCIe Gen3×2 channel and six downstream SATA Gen3 ports. The theoretical transmission rate of a single port is as high as 600MB/s, fully matching the data transmission requirements of the latest trendy devices; relying on the native NCQ command queue technology, the hard disk firmware read and write completely bid farewell to the PIO inefficient mode, with stable and reliable speed. It also supports advanced features such as port multiplication and device sleep management, providing underlying hardware support for multi-scenes such as server storage and monitoring platforms.

（PCIe x1 interface）

Power Revolution: Say Goodbye to Power Anxiety and Protect Every Bit of Data

1. Graphics-card-level power supply interface: The entry power directly adopts the PCIe 6+2pin graphics card power supply standard, thoroughly solving the power supply bottleneck when six disks are fully loaded, and the long-time high-load operation is as stable as the beginning.
2. Intelligent electric parameter monitoring system: Real-time detection of the voltage/current status of each port, abnormal fluctuations immediately warn, so that the data recovery process "can be seen, controlled, and more at ease".
3. High-reliability power supply system: Selected imported components, the power supply motherboard is upgraded to a 4-layer PCB circuit design, effectively improving the power integrity and anti-interference ability. The power supply architecture is flexible to adapt - a single power module can stably drive 4 hard disks (compatible with four-disk scenarios), a dual power configuration meets the basic power supply needs of 6-disk, and a three-power scheme provides redundancy guarantee for high-load operations; supporting hot-swap and real-time monitoring of the voltage/current of each port, multi-disk concurrent operation is stable and worry-free.

(ATA+Power 0-3)

Core Features at a Glance

1. Six-channel SATA 3.0 full-speed interface: Single-port 6Gbps (600MB/s) transmission, six-disk concurrent without bottlenecks.
2. PCIe Gen3×2 upstream bandwidth (16GT/s), low-latency architecture + L1 deep energy-saving mode, performance and energy efficiency are both obtained.
3. Full protocol compatibility: Perfectly downward support SATA 1.0/2.0, seamless connection with generations of storage devices.
4. NCQ firmware acceleration engine: Hard disk firmware read and write the whole process of UDMA mode, complex firmware repair scenarios efficiency doubled.
5. Intelligent power guardian: Graphics card power supply interface + port-level electric parameter monitoring, multi-disk operation zero power failure risk.
6. Enterprise-level reliability: Support AER error reporting, SRIS signal integrity, port LED status indication, professional scenes to deal with calmly.
7. Scene full coverage: Dedicated to data recovery, judicial evidence collection and other high-demand scenarios in-depth optimization.

(ATA+Power 4-5 front)

Industry Significance: More than "One More Port"

From the UDMA breakthrough of the two-port card, to the 6G popularity of the five-port card, and then to today's "interface + power + intelligence" trinity innovation of the six-port card - MRT always takes user pain points as the innovation origin. The six-port design accurately matches the power supply requirements of mainstream high-power hard disks, the graphics card power supply scheme ends the industry's long-standing power supply stubborn problem, and the port-level monitoring function establishes a new safety benchmark. This is not only an increase in the number of interfaces but also a key step for data recovery hardware to move from "tool" to "intelligent platform".

(ATA+Power 4-5 back)

"The king is back, setting a new benchmark again!"

The birth of the MRT Ultra 3.0 six-port card marks that the data recovery hardware has officially entered the "high concurrency, high stability, high intelligence" trinity new era. From today, the global synchronized sale, sincerely invite every data guardian to witness the hard verification!

(PCIe 6+2 power input * 3)

MRT Firmware Lab · Focus on data rebirth for 17 years