| Back to home | MRT Pro data recovery software former upgrade logs |
| MRT data recovery software upgrade log | |
|
September 3rd, 2024
Main program, upgraded to 2.1.10.1:
MRT Chinese and English website:
1. Added certificate replacement to align with the new online version verification method
MRT program package:
1. Updated the driver to resolve the "Init Device failed" issue on Windows 10/11 64-bit operating systems when resuming from hibernation with BIOS fast boot enabled. For other issues, please contact MRT sales or technical support
2. Updated MRT Tool compatibility list configuration:
Compatible: AMD Ryzen 5 5600G, AMD Ryzen 5 7600X, AMD Ryzen 7 5700G
Incompatible: Intel 6 Series/C200 Series, Intel 8 Series/C220 Series
3. Changed the configuration method for the online version verification URL, removed the fixed verification URL for Mrt.exe, now verifying from the configuration file
Disk scanning tool:
1. Fixed the description error of the exit icon
Western Digital module, upgraded to 2.3.10.1:
1. Added support for new family and firmware unlock: 810051-CarmelRP-1024KB
2. Added new family identification code: 810070-CarmelRP2L
3. Added new family identification code: 810082-Fblite2
4. Added new Spyg2 family PCB number: 810041-USB (WD40NDZW/WD50NDZW, 512KB)
5. Added new Spyg2Ult family PCB number: 810033-TypeC (WD40NDZM-59A8KS1, 512kb)
6. Added new Palmer family PCB number: 800086-TypeC (WD10SDRM, 1024KB)
7. Added new Charger family PCB numbers: 810013-TypeC (WD20SDRM, 1024KB), 810068-USB (WD20SDRW, 1024KB)
8. Added options to Edit HDD ID: Prohibit TLER time-limited errors, Prohibit TLER refresh
9. Added two new T2 data formats, with new structures discovered in 810011, 810035
10. Added new search mechanism: Automatically search for a complete T2 header when the first node of the T2 entry pointed by TIS is damaged
11. Optimized the unlock function for 800067, 810011 hard drives
12. Optimized the function of loading T2 with the T2 factory program to handle power-off issues
13. Optimized the algorithm for searching all T2 nodes, no longer relying on the "TIS" identifier, and support 190 modules that are relatively complete in structure but have lost TIS
14. Optimized the T2 editor to synchronize the display interface when the expanded entry list is updated upon reloading T2
15. Optimized the default detection range of the SA module: Removed module 0C, added modules 4A 4D 148 183 411
16. Fixed the occasional capacity 00 issue in Edit HDD ID function
17. Fixed the issue of reading part of the modules failing on hard disks of the 800xx series
18. Fixed the data reset issue encountered when using by ID mode to read password-related modules
19. Fixed the issue of the search module function when searching for 190, where the 190 module size is incomplete
20. Fixed the error of copy 0 and 1 that can be selected separately when SA structure test function defaults to using the by ID method
21. Fixed the display issue of a large number of English terms, unifying the description of the same functions
Seagate module, upgraded to 2.0.10.1:
1. Reconstructed the unlock algorithm for the AF family SEDx firmware version to prevent user data encryption after unlocking
2. Added new family on panel family: Mobula-B4
3. Added firmware unlock support for Mobula-B4 family, ROM size 2048KB, collected models:
ST10000NM0568-2H5110
ST12000NM0008-2H3101
ST14000NM0018-2H4101
4. Added firmware unlock for Evans-BC family, ROM size 2048KB, using exchange commands new method
5. Added virtual startup support for Evans-BC family, ROM size 2048KB, using exchange commands new method, collected models:
ST10000NM001G-2MW103-SNxx
ST16000NM001G-2KK103-SNxx
6. Added ROM patch for B2 family with related XNvC errors (patch bar on ROM tool interface)
7. Added ZONE table acquisition of B5/BC hard disks with large capacity
8. Added P-table parsing and editing support for BC family
9. Added filtering configuration for A1 family backup system files
10. Added new feature code for non-resident G-table
11. Added save directory and backup ROM strategy for ROM head parameter adjustment adaptation
12. Optimized the automatic verification algorithm of the 40 module
13. Optimized the verification strategy of the 8C/A5/AF family RAP
14. Optimized the "single sector read (error and continue)" option in the system file list, default to serial mode
15. Optimized the backup module overwrite prompt
16. Optimized the default ROM size for 91 family automatic firmware unlock, set to 2MB (512K also exists)
17. Optimized the default baud rate for B2 family, changed to 460800
18. Optimized full resource backup, added default checked system files: 0x36, 93, 226, 227, 30A, 330
19. Optimized translator and NRG corresponding ID for 3E family, changed to 0x1C, 0x26, synchronized the modification of system file descriptions and full resource backup IDs
20. Optimized P-table, translator, and NRG corresponding ID for 27-Moose family, changed to 0x10, 0x1D, 0x27, synchronized the modification of system file descriptions and full resource backup IDs
Hitachi IBM module, upgraded to 2.2.10.1:
1. Added new family: HDx7280xxPAL
Hitachi ARM module, upgraded to 2.0.10.1:
1. Added new family: HDx5C40ALE,
2. Added Toshiba item in the family panel, added new family ID: HDWD110, DTxxACA
3. Added "Write LDR" function, requires loading from backup resources
4. Added "Separate Module" option in LDR write interface
5. Adjusted function naming and classification in the "Diagnostics" column, clearer interface
6. Optimized menu bar function classification, consistent with shortcut button functions
Toshiba module, upgraded to 2.0.10.1:
1. Added new family: HDWD320
2. Optimized automatic family selection function
3. Optimized configuration storage method, resolving system environment dependency issues
4. Fixed the issue where the 75GSX family selection was not effective
Data Explorer module, upgraded to 6.0.9.3:
1. Added automatic identification of Bitlocker for file systems
2. Added Bitlocker unlock support: Enter password, key, USB.bek file in the unlock interface to unlock and access the Bitlocker partition
3. Added three types of Bitlocker: BitLocker Windows Vista, BitLocker Windows 7 (not only supports win7) and BitLocker To Go
4. Added multiple Bitlocker decryption algorithms, including AES_CBC, AES_XTS, Elephant Diffuser, etc.
5. Added support for the maximum number of head bitmaps that can be divided, current limit is 16 heads
6. Fixed the bug that stops the copy process when encountering bad blocks, improving copy stability
7. Fixed the memory leak issue that may occur when the program exits abnormally, enhancing stability and reducing waste of system resources
8. Optimized the counting logic for each data type of the bitmap
9. Optimized the data copy transmission method, improving program stability and data transfer efficiency
10. Optimized the save file path option, default no longer provides the parent folder as the initial target path, improving user experience
Silicon Motion module, upgraded to 1.2.10.1:
SM2258XT program, entry selection Silicon Power (Silicon Motion):
1. Added support for two types of virtual translators: loading internal Loader and external Loader methods
2. Added function to load external Loader resources
3. Added read page verification and retry function
4. Added SiliconPower error handling function, added more log printing for easy error retrieval
5. Reconstructed SiliconPower read flash function, increasing the amount of valid data obtained
6. Reconstructed SiliconPower virtual translator algorithm, fixing the original large number of 02 errors
7. Optimized SiliconPower interleaved block data processing algorithm, improving running speed
8. Optimized SiliconPower ECC processing, enhancing software stability and disk repair success rate
9. Optimized SiliconPower page type detection, enhancing the algorithm for obtaining valid data
Phison module, upgraded to 1.2.10.1:
PS3109 program, entry selection Silicon Power (Phison):
1. Optimized the virtual translator construction process for PS3109
2. Fixed the entry crash issue
3. Fixed the memory crash BUG when relocating the fast table, optimized memory allocation
PS3111 program, entry selection kingston2 (Phison):
Note: For AS2258 controller, select Silicon Power2 (Phison) and maintain the short circuit while loading LDR
1. Fixed the crash issue caused by overflow during page type detection, added log detection for error reporting
PS3112 program, entry selection Seagate2 (Phison):
Note: The PS3112 controller uses a translator method compatible with the NVMe 1.3 protocol, and the translator's mapping table will change during each power-up process. To ensure data validity, in case of abnormal power off during copying, please power off for at least 5 seconds, recreate a new virtual translator and start mirroring from the beginning
1. Added program entry: Seagate2 (Iron Wolf 125, Barracuda 120)
1. Added function to create a virtual translator
2. Added joint read function, joint flash write function
3. Added patch read, patch write functions, patch flash write function
4. Added ChipID read and write function
5. Added LDR loading function
6. Added handshake function, handshake verification function, wave-off function, ENCODE status function, obtaining factory technical secret key function
7. Added SMART data save function
7. Reconstructed the entire Phison family error response log, adopting more checks for easier error diagnosis
9. Optimized the Phison module scan valid block algorithm, improving running speed
10. Optimized the Phison module filtering algorithm, improving running speed
12. Fixed the issue of the L2P table missing some data, the current virtual translator can find more valid data
13. Fixed the issue of missing a small part of data in valid blocks under special circumstances
February 5th, 2024 MRT Program Package: 1. Adjusted the registration process display of the MRT registration panel to optimize the user experience. Main program, upgraded to 2.1.9.3: 1. Adjusted the network verification strategy for online version when opening MRT. 2. Added "default configuration" option for signal adjustment function. 3. Added default signal parameters for signal adjustment function for various Western Digital PCB numbers. 4. Added the option to "save configuration to chip" for signal adjustment function 5. Adjusted the panel layout for signal adjustment function. 6. Optimized the wording for the signal adjustment function in both Chinese and English. Western Digital module, upgraded to 2.3.9.3: 1. Added T2 editor's rebuilding algorithm for the selected "search for all nodes" (Methods one and two) to handle formatting situations where the 190 nodes are not severely damaged. 2. Added T2 editor's rebuilding algorithm for the unselected "search for all nodes" (Method three), suitable for cases where the 190 entry is damaged and after rebuilding, Method one occasionally encounters a power outage during copying. Note: After this upgrade, the T2 editor adopts different strategies regarding whether to select "search for all nodes." Please be sure to watch the subsequent T2 tutorial to understand the usage. 3. Added the LBA entry checkbox mechanism for the T2 editor, which can specify any LBA node to rebuild the T2 index. 4. Added valid data size statistics, displayed in the log when loading the 190 module or T2 file using T2 editor. 5. Added the mechanism to skip damaged tracks during full backup, defaulting to skip the current track when encountering bad sectors. 6. Added the "skip corrupted tracks" option for track backup. When selected, the current track is skipped when encountering bad sectors, and when unselected, the drive continues to read when encountering bad sectors. 7. Fixed the unlocking algorithm issue for PCB number 800077. 8. Fixed the initialization failure issue of Western Digital DE's factory mode for non-SMR drives. 9. Optimized the "disable 411" function of the firmware unlock panel. 10. Optimized the available node search mechanism for the T2 editor, specifically for more confusing 190 module TIS mark. 11. Optimized the track backup function to not display reserved tracks by default, facilitating the backup of valid tracks. 12. Optimized the logic for handling bad sectors when reading firmware using the track/ABA method, significantly reducing the waiting time. Seagate module, upgraded to 2.0.9.3: 1. Optimized the default system file options for 3E family full backup. 2. Optimized the description of common system files for the 3E family. 3. Optimized the default skipping of system files (volume3, 0x313) for the B2 family to prevent automatic power-off/on of the hard drive. Phison controller: 1. Fixed the occasional crash issue of the PS3111 firmware scanning process. 2. Optimized the running speed and memory usage of the PS3111 program. Silicon Motion , upgraded to 1.2.9.3: 1. Optimized the low success rate of loading initial default LDR for 2258XT. 2. Optimized filtering LDR by type for 2258XT. Data Explorer module, upgraded to 6.0.9.3: 1. Added real-time size display for statistical folders. 2. Added Shift operation for file browsing, enabling the selection of multiple files or folders. 3. Fixed the error of not restoring the last value at “scan block size” when deselecting single sector mode. 4. Fixed the abnormal sector map statistic in data statistics panel. 5. Fixed the issue where selecting to skip 241A was not effective. 6. Fixed the color marking error for skipping erroneous sectors. 7. Fixed the problem of NTFS file system encountering folder cycling during parsing. 8. Adjusted the RGB values of multiple sector blocks to make them more distinguishable. 9. Optimized the initial state of creating the head map. September, 25th, 2023 MRT main program, upgrade to 2.1.9.1: 1. Added a new module: MRT Equalizer ROM Tool, used in conjunction with the MRT Signal Equalizer for reading and writing ROM data. Note: Make sure to select the COM port for the equalizer, not the terminal COM port. The interface now displays the COM port. 2. Added shortcut button for signal adjustment on the main interface, used with the MRT Signal Equalizer to adjust signal parameters. 3. Added a global prompt to confirm closing MRT, preventing accidental closure of all windows. 4. Optimized the registration code storage to the system registry. If the system environment remains unchanged, repeated software installations no longer require a registration code. 5. Optimized the opening of the MRT main program. Double-clicking now defaults to opening in administrator mode. Popup program: 1. Adjusted the popup notifications into three categories: announcement popups, tutorial popups, and software upgrade popups. 2. Adjusted the expiration time of the "Ignore" option in popups. The default setting now ignores the current popup for 7 days. 3. Optimized the layout and interface display of popups for a cleaner look. ROM programmer tool: 1. Added chip configurations for IS25WP020, 040, 080. 2. Added auto power-off mechanism after each read/write operation. 3. Released the setting of erase waiting time, increasing adaptability for 2MB chip. 4. Optimized the startup process and operation display in the log interface. 5. Optimized the folder dialog to display as a list. Disk scanning tool: 1. Fixed occasional crashes when the capacity LBA is -1. Hitachi module: 1. Fixed the issue of MRT crashing when clicking on disk format function. Western Digital module, upgrade to 2.3.9.1： 1. Added support for new families: 800069-Palmer72 810011-CarmelR7 810032-AvalonC5 810032-CarmelRP2L 810035-Spyg3 810051-VeniceRP 810051-VeniceRP2L 810070-CarmelRP2L 810082-Fblite2 Note: 810051 headmap creation does not require 190 module. 2.Added firmware unlock for below PCB versions: 810003-1024KB 810030-512KB 810033-512KB 810051-1024KB 810067-512KB 810082-512KB Note: 810070 does not have firmware lock. 3. Restructured the Western Digital 800xx series family panels to be categorized by Family, PCB, Unlock, and ROM size. The new interface provides a smoother user experience. 4. Added the option to unlock firmware from the MRT Equalizer in the firmware unlock dialog. 5. Added the option to disable 411 in the firmware unlock dialog to prevent long busy issues after ROM unlocking, making subsequent processes easier. 6. Added a log report for the selected family in the firmware unlock dialog. 7. Added support for reading T2 files in the Data Explorer factory program. 8. Added the TIS selection panel of unfolding T2 entries for 190 module in T2 editor, specifically for cases where there are multiple TIS markers. 9. Added an option to search for all valid nodes in T2, addressing the following scenarios: when T2 entries in 190 module are incomplete or contain errors, when a new T2 overrides the original T2, search for all possible valid nodes, filter and process them, and generate a new T2 structure. Upload the new T2 to RAM using the T2 editor or load the T2 file into DE factory program to recover data. 10. Added the ability to view the SMR ZONE table. 11. Optimized the size of generated T2 file, changed the capacity value from 512 to 4K, reducing the risk of power failure during data reading operations. 12. Optimized the Western Digital head map in DE and added the option to not use the 190 module for cases where there is a 190 module but it is not utilized in the 810051 scenario. 13. Optimized the default mode for module backup and SA structure detection to use the ID method. 14. Optimized T2 parsing for the 190 module to only read valid data. 15. Optimized memory usage of the 190 module to reduce insufficient memory feedback. 16. Optimized the display of the module offset feature to handle cases where there are no tracks available for offset and no dialog box is displayed. 17. Optimized the saved paths for the original T2 file and processed T2 DumpRowData file for the 190 module. 18. Fixed cursor positioning issue when adjusting the number of display columns in the hex editor. Seagate module, upgraded to 2.0.9.1: 1. Added support for unlocking new AF family firmware, covering certain products from 2021, and 2022, 2023, PCB versions 100835923 REV A/REV B. 2. Added support for the new D0-V15_JanusR2 and D1-V15X_JanusR2 family panels. 3. Added support for unlocking D0 and D1 family firmware. 4. Added support for virtual booting of D0 and D1 families, collected models include: - D0-ST1000DM014-2UB10D - D0-ST2000DM005-2U9102 - D0-ST2000DM008-2UB102 - D0-ST2000DM008-2UB102 - D0-ST4000DM004-2U9104 - D0-ST4000DM009-2U9104 - D1-ST1000DM014-2UB10D PCB version 100870255 R5EV A Note: The new AF/CF/D0/D1 families and future new products do not support direct read/write of ROM in bootcode mode. Physical desoldering with a programmer is required. 5. Added module verification function for 40 module, supports manual selection of data segments and automatic verification. Please check data source selection icon after opening 40 module in module list. 6. Added an option in settings: save virtual ROM at virtual boot 7. Added an option to ignore error and continue reading in system file list. Useful in cases where the 348 header data of AF family is damaged and cannot be read conventionally. 8. Updated MRT Loader factory firmware package, added more official firmware, and adjusted the flash generic firmware function. Note: The new package Seagate.ldr requires an upgrade to version 2191 or above, while the old package sgtsaldr.ldr is only used in version 2184 and earlier. 9. Optimized the logic for searching the Preamp type in editing SAP logical mark in ROM tool, and default display of 0x0000 data when not found. 10. Optimized the display issue of BC family logical head map (encrypted type). 11. Optimized the overall verification of CAP RAP SAP, supports verification values in the middle of the data. 12. Fixed the software crash issue when clicking the ROM adaptation function in the 70 family to generate a NEW ROM. 13. Fixed failure of head parameter adaptation in the ROM tool. 14. Fixed overall verification failure in RAP for certain family models. 15. Fixed the data saving error after opening P-list in Edit 03 function. 16. Modified and standardized the wording display of certain functions. Data Explorer module, upgraded to 6.0.9.3: 1. Added parsing support for the .xfs file system. 2. Added a shortcut button for signal adjustment, working in conjunction with the MRT Signal Equalizer to adjust signal parameters. 3. Added a setting option to skip Seagate 241A and sEDU sectors. 4. Added a right-click option in file explorer: Save current expanded directory structure and complete directory structure as a .dtst file. 5. Added a right-click option in file browsing: Classify and sort files for easy extraction. 6. Added a linked mechanism for single sector copy mode and read block size between 512 and 4K hard drives. 7. Added log display when saving files 8. Optimized default initialization copy parameters to improve adaptability and reduce the number of parameter adjustments. 9. Optimized the logical function of saving files to include only the parent folder and complete path, reducing folder hierarchy and path length. 10. Optimized the selection of head map, with all heads selected by default. 11. Optimized the recursive writing method for marking valid data in .xfs file systems, improving program stability. 12. Fixed the issue of failed expansion due to damaged DBR in NTFS system search partitions, using backup DBR data for parsing. 13. Fixed the issue of incorrect size calculation for multiple items in .xfs file systems. 14. Fixed the error display issue when viewing size statistics for multiple marked items. 15. Fixed the issue of occasionally displaying other menus when right-clicking in the tree control. SSD module: 1. Optimized migration of Access database to SQlite database. Silicon Motion controller, upgraded to version 1.2.9.1: 1. Reconstructed the algorithm for creating virtual translator in SM2258XT family. 2. Added initialization process for SM2258XT to reduce information retrieval error rate. 3. Added SSD brand and model for HP H6008 (SM2258XT). 4. Added multiple SM2258XT Loader resources: - P0617B0 58TLC_00 - P0628B0 58TLC_00 - P1218A0 IM3D_00 - Q0109A0 HY14_00 - Q0602A0 BiCS2_01 - Q0626A0 BiCS2_00 - Q1115A0 IMB16_00 - R0314B0 IM3D_00 - R0423A0 IM3D28_00 - R0427A0 BiCS3_02 - R0724A0 SS14_00 - S0108A0 IMB17_00 - U0817A0 TBiCS4_04(AD) - U0330A0 YMTC_00(AD) - U0401A0 SN1Z2P_00(AD) - T0521A0 BiCS3_02 - S0628A0 LBiCS3_02 - S0719A0 B05_00 - S0724B0 HYNV4_00 - T0803B0 TBiCS4_04(AD) 5. Added category filter for Loader resources. 6. Optimized 2258XT loading and relocation block table algorithm. 7. Optimized 2258XT loading CP list algorithm. Phison controller, upgraded to 1.0.9.1: 1. Added support for the following PS3111 SSD brands and models: - Silicon Power2 A55 - Patriot Burst - GOODRAM IRDM - Lite-On PH4 - Lite-On PH6 - Silicon Power A56 - Gigabyte GSTFS31 - Foxline FLSSDX6SE - Apacer AS340 - Apacer AS350 2. Added several PS3111 loaders: - Burner_PS3109_01.6 - Burner_PS3111_61.5 - Burner_PS3111_71F1_K - Burner_PS3111_11.3 - Burner_PS3111_B1H5_K - Burner_HG2258_E1.3 - Burner_HG2258_EA2 - Burner_HG2258_EB1.0 3. Reconstructed the algorithm for creating virtual translator for PS3111. 4. Optimized the algorithm for relocating block tables. 5. Optimized the algorithm for loading CP list. 6. Optimized and added scanning algorithms and data reading methods required for compiler creation. 7. Optimized and increased the acquisition of a large amount of internal data to serve translator creation. 8. Optimized log information printing and interface refreshing for more intuitive operation display. 9. Optimized runtime memory to improve execution speed. 10. Fixed stuttering issues when obtaining internal data and resolved issues of process termination and incorrect feedback of acquired information. 11. Fixed the issue of incorrect file sizes in older version auxiliary files. July 11,2023 Note: This update comes with a 2.1.8.4_OS version, which uses an earlier security shell program. It is currently known that the new security shell may cause unexpected bugs, which may require some time to adapt, especially when installing and using it after disabling security software such as 360. If software bugs that cannot be replicated occur, try using this installation package and installing it in a different directory, then test to see if the unexpected bugs disappear. Main Program , upgraded to version 2.1.8.4: 1.Rewrote the programming tool to significantly improve chip read/write experience 2.Optimized and increased chip data read speed 3.Optimized folder sorting in the programming directory Western Digital: 1.Optimized firmware unlocking solution, no longer requiring a designated MRT New Programmer 3.0 2.Fixed display issues with numerous entries in the English version March,22th,2023 MRT package: 1. Optimized SATA channel function and MRT driver, greatly improved stability and compatibility of channel communication 2. Updated security program for installation package, which will increase package size Attention: please install MRT drivers as administrator and ensure all ATA channels are opened when using 2.1.8.3 version for the first time Main program, upgrade to 2.1.8.3: 1. Added transmission and reset for SATA controller of MRT Ultra card and Ultra 2.0 card on main interface - Tools - Standby/Reset/Speed. Optimized settings will take effect by default when opening MRT, no need to adjust Western Digital, upgrade to 2.3.8.3: 1. Fixed the issue where search internal module does not work for loading from a file 2. Fixed the issue of incorrect view during focus switching in the hex editor 3. Fixed the issue that hex editor selection precinct moves up or down when adding/decreasing columns 4. Optimized the translation of entries in English and corrected the problem of non-standard logical display 5. Optimized the idle track searching algorithm of offset current module function. If the search fails, you can also manually fill in the CHS information Seagate, upgrade to 2.0.8.3: 1. Added thread status display for bootcode mode to facilitate click Stop or End when bootcode mode does not respond 2. Fixed the failure of fast clearing NRG for LM series 3. Fixed NRG writing failure for LM series 4. Optimized and uncheck HOST LBA option of headmap creation in Data Explorer for Seagate drives 5. Optimized the reading ROM size to 2MB for family 91, previous versions should better read 1MB and 2MB for safety 6. Optimized and enabled automatical refreshing when opening track list 7. Optimized track and sector conversion function and automatically convert sector type according to sector 4K feature 8. Optimized system file list obtaining strategy in basic state 9. Optimized reaction strategy of bootcode mode to improve success rate of ROM reading Data Explorer: 1. Fixed the problem of incomplete file data copying in some cases when imaging or saving files 2. Fixed the problem of garbled code display in search partitions and cumulative addition of multiple search partitions 3. Fixed the problem that the searched partitions do not display when exiting and entering the project again after the partition searching ends November 22, 2022 MRT package: 1. Optimized and improved the device compatibility of MRT Express on Intel Chipset motherboards and reduce the chance of device status error Note: Please be sure to install the new MRT driver file as administrator Main program, upgrade to 2.1.8.2: 1. New menu bar "Announcement": Visit the official website (CN:vip.mrtlab.com EN:vip.mrtlab.com/en/) Visit the user center (CN:info.mrtlab.com EN:us.mrtlab.com) 2. Added announcement pop-up window on main interface, including now software upgrade notification and other notifications(such as tutorials, announcements). Single click "ignore notification", the effective period is 1 week 3. Optimized the soft/hard reset operation within a single read command cycle ROM programmer tools: 1. Optimized the ROM programmer's strategy of reading and writing ROM, and added data verification by "block". Western Digital: 1. Added new feature to disable and enable module 183 in ROM tools 2. Added a log to notify the status of module 183 3. Fixed the problem about failure to unlock PCB 810035. For version 2173 we need to choose 800022 to unlock 810035 4. Fixed the size error of the modules saved during resources backup 5. Optimized the dump T2 function without rebuilding T2 to mitigate unstable reading issue that occurred during data copy (Usually appeared when there are miss-aligned entries in module 190) 6. Optimized the search function of internal modules Seagate, upgrade to 2.0.8.2: 1. Added A2 family UA and SA 4K option default configuration to avoid reading wrong system file size 2. Fixed the bug as to 97 family unlock failure 3. Fixed the issue about reading ROM error after bootcode mode recognizes the family under family interface 4. Fixed the error that there appears “Unlock failed” due to incompatible family when trying to unlock drives that belong to family 72 5. Fixed the software corruption issue that may occur when MCMT outputs log information 6. Optimized the unreasonable default configuration of some families 7. Optimized the default ROM size read by A0 family from 512 bytes to 1024 bytes 8. Optimized the preamp type display error of SAP information in ROM tool DE module: 1.Added "Show only system drives" option in the device panel when creating task 2. Fixed the problem that some partitions cannot be analyzed and expanded 3. Optimized the LBA statistic algorithm to make it more accurate August 21th, 2022 Silicon Motion, upgrade to 1.2. 7.0： Added full features support for 2259XT (Silicon Power module), including the following features: 1. View basic information 2. Chip information view 3. Load LDR from built-in database which contains more than a dozen ldr files 4.ROM Debug mode 5.Read and Write CP 5.Read and Write RAM 7. View password 8.Read MPISP 9.Obtain reallocation table 10. Functions such as create virtual translator Phison, upgrade to 1.0.8.0: 1. Added support for Seagate Fast SSD (PS3110), Seagate One Touch SSD (PS3111) 2. Added a Loader for PS31110 3. Added 7 Loaders for PS31111 4. Added 7 chips of PS31111 5. Optimized the working logic for ldr write 6. Optimized the translator algorithm of PS31110, PS31111 Western Digital, upgrade to 2.3.8.0: 1. Added family ApolloCR- 810011, Tresul- 800068 2. Added firmware unlock support for board numbers 800022/800041/810012 and 810035 3. Added permanent unlocking for 800xx series (unlocking requires the assistance of new programmer 3. 0), removed the process of terminal exchange command, and supported unlocking for USB drives, The supported PCB versions are as follows: 800022/800041/810012, 800065/800067/810003, 800066/800069, 800077, 810011, 810035 4. Added the "Firmware Unlock" button on the family panel and removed the "Unlock and exchange commands" button 5. Added T2 editor support for 810035, allowing engineers to upload 190 to RAM 6. Added a right click feature to allow users to save selected hex data area under hex page 7. Added the sub-module analysis function in the module (ROM, 109 module) 1) Search and display the list 2) Save the selected module to a file 3) Load from file and replace 8. Added Western Digital backup module size setting 9. Optimized the process mechanism for T2 editor when dealing with partial data damage or abnormal data 10. Optimized the family and board number classification of the family panel 11. Optimized the startup process, serial port connection is no longer required for entering the program 12. Optimized and removed the "unlock and exchange commands" function of the ROM tool 13. Optimized and removed the "unlock and exchange commands" function in the shortcut bar on the right Seagate , upgrade to 2.0.8.1: 1. Added the support for CF family(Note: The ROM chip needs to be desoldered to read and write ROM, which is caused by the firmware download lock) 2. Added firmware unlock support for M15_Janus-CF family (ST4000LM024-2U8, ST5000LM000-2U8) 3. Added virtual start support for M15_Janus-CF family (ST4000LM024-2U8, ST5000LM000-2U8) 4. Added preamp type display, path: Edit ROM file - Edit ROM information - Edit SAP logic tag 5. Added ROM logical head map for more families: 75 - ST500LT012 81 - ST1000LM033 86 - ST500LM021 8A - ST4000LM016 8C - ST2000LM007, ST2000LX001 A5 - ST2000LM007 AF - ST1000LM048, ST1000LM035, ST2000LM015, ST2000LM007 6. Added the default size for ROM reading with family 91 to solve the crash problem caused by abnormal ROM size 7. Added track table view 8. Optimized firmware unlock and virtual boot support for 91, 97, B2, B5 families 9. Optimized the initialization process. When the firmware information has been obtained, the next time program will first load firmware from file when users re-enter the Seagate Utility 10. Optimized the sorting display of the system file list to display volume 0 and volume 3 first 11. Optimized the main interface to display the COM connection port number directly 12. Fixed the error that some families reported 0xC00000005 during ROM parsing 13. Fixed a bug that the box ID of module list edit does not follow the module selected by the cursor to update 14. Fixed a bug occurring when outputting MCMT analysis results (After the progress reaches 99%, software crashes) Data Explorer , upgrade to 6.0.0.2: 1. Added USB device head map support in Data Explorer (800xx series may need to unlock firmware, head map requires modules 183 and 190) 2. Added USB device factory reading support in Data Explorer (800xx series may need to unlock firmware) 3. Added 3 copy types and color marks: Seagate data 241A, sEDU sector, data all 0 sector (for data loss of 190 module in RAM, which may lead to data 00 ) 4. Added task statistics and clear option to manage sector bitmap for the above-added copy types 5. Added RAW scan format: CHM, Z7, WMF, ANI, MID, OGG 6. Optimized and redefined the "read successful" green block type and changed it to "read successful not null" sector 7. Optimized the speed of marking valid data 8. Optimized the function of saving files and fixed the failure to save very small files 9. Optimized the compressed bitmap mapping algorithm and fixed the crash issue when the compressed data is abnormal 29th. December 2021 DE Utility, Upgrade to 6.0.7.2: 1. Fixed the compatibility problem of some tasks running under 64-bit system 2. Fixed the bug that software may fail to modify 55AA when VHD is the target device 3. Fixed the problem of VHD task re-opening failure 4. Fixed the problem of PC partition loss due to data duplication to VHDX 5. Fixed the occasional error report about incorrect node while browsing files 6. Fixed the problem that the duplication process aborts when PNG and ZIP are selected in the stream scanning 7. Optimized the default modification of MBR when creating VHD tasks 8. Optimized the sorting mechanism during file system node analysis Western Digital Utility upgraded to 2.3.7.2: 1. New detection of ROM header when reading ROM from programmer to determine whether ROM chip is correctly placed 2. Optimized user experience of BOOTROM 3. Optimized T2 editor to fix the abnormal capacity of drives with board 8100035 4. Optimized the data judgement mechanism when ROM tool reads ROM from programmer and generates unlocked ROM. 2nd. November 2021 The main program of MRT is updated to Ver.2.1.7.1 with the following updates: 1. Added shortcut for creating a specified interface after selecting channels. 2. Optimized some underlying structure. Programmer utility, upgrade to 1.0.7.1 with the following updates: 1. Added support for MRT Programmer VER 3.0. 2. Optimized SPI reading and writing stability. Western Digital, upgrade to 2.3.7.1: 1. Added new families of 800xx series: Carmel(800077), VeniceR(810011), SPYG2ULT(810035). 2. Added WD firmware unlocking solution: Create Unlocked ROM in ROM tool, which can support mainstream laptop drives such as 800065(Chager), 800066(Palmer), 800077(Carmel), and 810011(VeniceR). (It enables the engineer to generate unlocked ROM file by an automatic process including original ROM reading/analyzing and write-back of the unlocked ROM data) 3. Added T2(module190) editor with functions such as Obtain T2 Data, Parse T2 Data, and Edit T2 Data. 4. Added headmap in Data Explorer, which is based on T2 data, for families Carmel, VeniceR, Charger, e.t.c. 5. Added features of Repair T2 and Upload T2 Data to HDD RAM to facilitate the solutions for part of difficult HDD malfunctions such as all sectors displaying 00, automatic power off while trying to read LBA, and bootup failure due to module 190. 6. Added the feature of Exchange commands & unlock in ROM tool and shortcut button, which requires the assistance of serial ports and ROM data unlocked by MRT. 7. Added function that allows manual input of the module ID in HDD resource viewer. 8. Added seperate ROM ID for entire ROM in ROM module list. 9. Added Serial port connection/disconnection buttons to the tool bar. 10. Added Log/Terminal, COM Switch buttons to family panel and power on/off icon to WD shortcut button bar. 11. Optimized the feature of Remove HDD password. 12. Optimized ROM writing to support new HDDs with large ROM size. 13. Optimized family interface by adding the exclusive page for 800xx series. 14. Optimized Edit HDD ID in RAM. 15. Optimized the underlying database structure. 16. Optimized Logcal Scan function that it will display speed. 17. Optimized database engine to avoid JET database engine error. 18. Optimized the function of saving modules in batches. Seagate F3, update to 2.0.7.0: 1. Added MCMT parse function. 2. Added MCMT edit function. 3. Added MCMT Extent edit function. 4. Added Firmware Unlock for family 97. 5. Added support of transfering defects into P-list for family 58: ST3000DM001-1ER166, ST2000DM001-1ER164, ST1000DM001-1ER162, ST500DM002-1ER14C, ST1000DM001-1CH162, and ST2000DM001-1CH164. 6. Added support of file dragging to Virtual Start dialog box. 8. Added buttons of Selecting Copy0 and Copy1 to dialog box of Backup sys file feature. 9. Added customization of Default baud rate/voltage selection. 10. Added filtering scheme to Backup sys file feature. 11. Optimized sys file description display of 5400.6. 12. Optimized default selected options of Backup sys file feaature for 5400.6. 14. Optimized selection strategy of Exchange Commands switch-over on the main interface(shortcut button on the right side) . 15. Optimized Edit HDD ID in RAM by adding an initialization error reminder. 16. Optimized capcaity display issue in some disks after editing HDD ID in Service Area Tools. 17. Optimized the mechanism of sys file backup to exclude the reading of sys files other than Volume 0, Volume 3. 18. Optimized underlying database structure. 19. Optimized G-list entry unfolding. 20. Optimized disk information configuration that is documented in folder Configure. 21. Optimized CAP modification with regard to capacity that is expanded to be more than 2T. Data Explorer, upgrade to Ver.6.0.0.4: 1. Added the following RAW data scanning formats: For media: FLV, MP4, MP3, AVI, WAV, MKV, RM, AIFF, MIDI For files: PPTX, XLSX 2. Optimized the speed for marking the valid data in partition. 3. Optimized the underlying architecture to facilitate user experience. 4. Optimized user operation verification to reduce logic errors. 5. Optimized File index creation and access speed. 6. Added internal commissioning to assist locating issues. 7. Fix a bug of the size of the file to be saved. Phison modules are upgraded to ver.1.0.7.0: 1. Added uploading LDR support of AS2258(PS3111). 2. Added virtual translator strategy for AS2258(PS3111). 3. Added parsing for categories such as Type of new chips 4. Optimized the underlying architecture of PS modules. 5. Optimized read and write firmware function. 6. Optimized read and write CP function. 23rd. April 2021 DE Utility, upgrade to: Ver. 6.0.0.3 1. Fixed data disorder occurred during saving files 2. Fixed data disorder occurred during preview 3. Fixed incorrect file folder name 4. Fixed the failure as to saving root 5. Fixed the auto-skip issue occurred when trying to image marked or current items 6. Fixed the problem of bad files not being categorized after being rescanned 7. Fixed the problem of file parse node not being auto-expanded Seagate Utility, upgrade to: Ver. 2.0.6.1 1. New default baud rate set for some functions 2. New default switch for saving CAP, RAP and SAP in ROM 3. New filtering mechanism for backup of system files (configuration file: SGT-F3SystemFile.ini) 4. Added the unlocking feature of family 91 5. Fixed the issue of some options of HDD ID being unavailable under certain conditions 6. Fixed the issue of LED_BD 4040 patch not being synchronized under LED firmware 7. Fixed the issue as to report of incorrect families when loading configuration files 8. Fixed the checksum error of family 91 9. Optimized the HDD ID feature to make it more stable 10.Optimized service area adaptive parameter tool Western Digital Utility, upgrade to: 2.3.6.1 1. Enhanced the headmap creation via secondary translator 2. Optimized the selection logic of the module backup function 3. Fixed the Carmel family classification error 4. Optimized the menu status display of some functions 8th. February 2021 MRT main program, upgraded to: 2.1.6.0 1. Optimized some features of the previous version 2. Added a new Phison family DEXP to SSD utility DE Utility, upgrade to: 6.0.0.2 1. Added the function to image files by format: currently the specified formats supported include ZIP, JPG, BMP 2. Added a button to set the file type to be filtered in the file browsing panel 3. Added some file formats supported by RAW stream scanning (PNG, JPG, RAR, ZIP, DOCX) 4. Added infrastructure multi-threading support for file saving, increasing file saving speed by 30% 5. Optimized the infrastructure error-tolerance for file node mapping 6. Optimized and redesigned the file node mapping interface to improve the stability of the file parsing process 7. Optimized and adjusted the position of the task information dialog of data extraction 8. Optimized the copy stability to prevent software crash when users try to stop multiple-copy task 9. Optimized the stability of file saving and scanning to prevent crash 10. Fixed a bug related with MFT size 11. Fixed a bug related with apple partition being inaccessible under file browsing mode 12. Fixed a bug that software may crash when trying to quit DE Western Digital, upgrade to: 2.3.6.0 1. Added a few new families: Spyg2 (800022), Carmelr (800077) 2. Added family Venicer to support drives with PCB Ver. 810011 3. Added a sub-option for automatic reboot under Edit HDD ID 4. Added Edit HDD ID to synchronize the model and serial number in the ROM 5. Added password clear normal password lock for drives of recent generations 6. Added SMART info Editor for important attribute values 7. Added Virtual Environment on loading LDR panel to support more drives (800066,800039,1960) 8. Added an independent RAM static module page in HDD resource viewer 9. Added an independent ABA range edit in ROM tool 10. Added Microjogs edit in ROM tool 11. Added Preamp DAC edit in ROM tool 12. Added ROM module verification by selecting specific data area when browsing the ROM file 13. Added relative offset jump in Hex editor, and software will memorize the previous offset position 14. Add memory function for filled values 15. Optimized the USB Decryption setting to allow software use previous setting as default 16. Added the option to skip module 190 when making full resources backup 17. Optimized track backup mechanism to exclude reserved tracks 18. Optimized module list reading logic to automatically switch reading mode from ID to Track when users try to read copy 1 under ID mode 19. Fixed software crash which may occur during the module backup Seagate F3, upgrade to: 2.0.6.0 1.New families and models added 8C family (LX015 SSHD) Firmware Unlock A2 family (NM0007, NM0127) Firmware Unlock AE Family (ST1000LM049) Firmware Unlock and Virtual Start B2 Family (ST4000VX005) Firmware Unlock and Virtual Start B5 family (NM000A 8T) Firmware Unlock 2. ROM Tool 1) Add SSHD_No_Flash patch to ROM tool, support 72(LM000/LM014 SSHD), 58(DX001 SSHD) 2) Added logical head map and SAP Edit for A2 and B5 in ROM Tool 3. Virtual start 1) Optimized the SMART_Fail patch to support more models from various families 2) Optimized the virtual start Patch_DWF to support more families 3) Optimized Patch_LED_4C51, renamed as Path_LED_BD_4C51_InitSMARTFail, compatible with more families (3A 3F 4F 58 63 etc.) 4. Added write LDR in RAM (requires assistance of virtual start) 5. Added Exchange Command for unlock (NEW) to ROM tools with an extension icon on the right shortcut bar 6. Added HDD ID Edit for Service Area: "Media Cache", "Media Scratch Pad Control" 7. Added log file DiskConfig.bin for recording basic status parameters with the "load from file" option 8. Optimized the compatibility of automatic identification with BootCode mode under family panel, allowing more families to be supported 9. Optimized "Disable Idle Activity" function in HDD ID 10. Optimized the folder creation process 11. Optimized algorithm of logic head mark detection in RAM 12. Optimized the issue that software would select family 27 when there is a failure with auto identification under family panel 13. Optimized HDD from 72 family will be marked as 4k (service area) by default 14. Optimize error feedback for RAM edit of physical head maps 15. Fixed the problem of showing repeated head map when switching head after the edit of head adaptive parameters 16. Fixed the issue that the Quick Clear non-resident G list does not work for LM drives 17. Fixed the problem that the service area edit HDD ID modification does not take effect Phison Utility, upgrade to: 1.0.6.0 1. Optimized SSD virtual translator algorithm to prevent no response issue 2. Embedded more firmwares in the Utility: 8 AS2258 1 PS3105 4 PS3108 1 PS3109 3 PS3110 9 PS3111 3. Added support for DEXP M6 drives 4. Added file parsing for new chips 5. Added bad block printing information when scanning 6. Optimized the algorithm of translator Silicon Motion, upgrade to: 1.2.6.0 1. Optimized 2258XT translator algorithm, SLC and TLC block identification being added 2. Optimized and redesigned the loader interface to enable users to update LDR manually 3. Added ROM Debug button for uploading ROM debug loader with 2258XT 4. Optimized and redesigned folder naming rules to add chip ID and current time in the folder name to distinguish drives with identical chip and firmware version 5. Optimized the xor loader of 2246XT to solve the problem that SSD virtual translator may succeed but with invalid data 6. Optimized the success rate of updating xor LDR with 2246XT 7. Optimize the boot log to show the chip ID before loading the loader September 08, 2020 MRT main program, upgrade to: 2.1.5.3 1. This upgrade is free for users who paid for the software of version 5.x 2. Optimized some functions of the previous version Silicon Motion SSD, upgradde to: 1.2.0.2 1.added the functions to support 2258xt SSD, include: 1)Loading loader 2)Virtual translator 3)Read CP 4)Check the status of SSD 5)Check passwords 6)Check Chip ID 7)Gain CP list 8)Loading reallocation of block 2.Optimized some functions of 2246xt SSD in last version. July 31st, 2020 MRT 2152 version, Version:2.1.5.2 1. Support the upcoming new MRT hardware 2. Optimized the support for SSD with the underlying structure. 3. The main interface displays the supported SSD controller chip Western Digital, upgrade to: 2.2.9.1 1.New families added Bigbear 2.5, Spyglass2, Venicer 2. Added the function of establishing virtual start environment, which can achieve the effect of using specific files to initialize HDD and make LBA readable (load some important modules to initialize the HDD and read the LBA) 3. Added PBA read in factory mode 4. Added CHS read in factory mode 5. Added the function of locking module 190 when modifying the user area, prohibiting the modification of the 190 module inadvertently 6. Added the function that unlocks the operation of module 190 7. Added support for the following SPI ROM chips in BootROM mode: SST25VF512，SST25VF512A，SST25VF010，SST25VF010A， SST25LF020，SST25LF020A，SST25VF020，SST25LF040A， SST25VF040，SST25VF020B，SST25PF020B，SST25VF040B， SST25PF040B，SST25VF080B，SST25P080B，SST25WF512， SST25WF010，SST25WF040，SST25WF020，SST25PF040C， SST25WF020A，SST25WF040B，SST25WF080B 8. Optimized the BootRom working mechanism 9. Improved the working mechanism of the HEXPAGE, when the HEXPAGE is opened, the software will now directly locate the folder belonging to the current hard disk 10. Optimized the function of ROM info edit. When the address of module 01 is 0x00, software won't report acquiring failure 11. Optimized the display logic of the error report of the module hardware inspection 12. Optimized the default option of fix slow responding 13. Optimized the default options of fix quick failure when reading sectors 14. Optimized the function of module backup, disabling the backup of module 0x00 15. Optimized the color display of reserved tracks in the 8000xx series log interface Seagate F3, upgrade to: 2.0.5.1 1. Added unlocking algorithm of the new EB01, 0001 firmware of the Seagate AF family 2. Added Seagate 95 family, A1 family, AE family. 3. Added few available functions to Seagate 8B family (ROM read and write, ROM unlock, module read and write, system file read and write). 4. Added few available functions to Seagate BC family (ROM read and write, ROM-SAP check 5. Added ROM unlock and virtual start to families 8B A1 A6 and AE. 6. Added the option of Virtual Start Patch_Translator_LED_BD_4C51 to fix the translator fault "LED: 0xBD FAddedr:0x4C51" 7. Added two virtual start LED firmware for family 94: DM003-CC43, familyAF: LM035-EB01, 8. Added patch Kahuna2 in ROM tool, for 58-DX series SSHD 9. Added RAM initialization, system file 12459A, translator address (system file 0x28), etc. 10. Added a function to load the adaptive parameters from ROM into RAM. 11. Added ATA read/write mode 2 11. Added headmap edit of LM series (4 heads). 13. Added interface drag and drop (ROM tool, p list, module Hex, system file Hex, G list, DST list, LBA defect list) 14. Added the system file backup overwrite reminder. 15. Added skip prompt for module backup 15. Optimized the virtual start Patch_DWF option to support more families 17. Fixed the bug of virtual boot failure of 4F family 18. Optimized the system file parsing compatibility to support all three copies(copy0/cpoy1/copy2) 19. Optimized the cancellation in the middle of reading system files to avoid terminal port reporting garbled characters . 20. Optimized the success rate of Bootcode reading in ROM tool. 21. Optimized the working mechanism of serial port to prevent it from continuously setting voltage during data transmission, resulting in HDD busy. 22. Optimized the checksum algorithm for modification of 0x3C_RAP by third party software. 23. Optimized the virtual start interface 24. Optimized the headmap performance for HDD with more than 8 heads 25. Optimized the head parameter adaption interface to improve software conveniency 26. Optimized the adaption of head parameters for compatibility with more families 27. Optimized the serial port information display (main interface) DE Utility, upgrade to: 5.0.0.1 1. Added path management for the file saving function. 2. Enable user to image valid data in bitmap interface under file browsing mode 3. In the underlying architecture, add a bitmap data exchange interface between the copy function and file analysis. 4. Added the marking and clearing function to single valid bitmap list in the mirror partition of the bitmap interface. 5. Added the operation of file bitmap in the mirror partition of the bitmap interface. 6. Added the copy of file bitmap in the mirror partition of the bitmap interface. 7.Added the deletion and addition of file bitmap in the mirror partition of the bitmap interface. 8. Added the concept of the virtual Virtual LBA address of the bitmap in the mirror partition of the bitmap interface 9. Added the sorting of the bitmap list segments of all valid data files in the partition (by size, physical LBA, Virtual LBA) 10. Added Virtual LBA bitmap mapping of valid partition data 11. Added the path management function for corrupted files. 12. Optimized the logic of retaining the upper-level path and the complete path in file saving 13. Optimized the judgment rules for corrupted files. 14. Fixed the problem of file saving failure after saving the current item failed. 15. Fixed the problem that the creation of DE task fails when the HDD capacity is larger than the default. 15. Fixed the copy of VHD to solve the problem that VHD copy may sabotage the original system partition. VR Utility, upgrade to: 2.0.0.1 1. Added support for data recovery of Hikvision's 16-channel and 32-channel data. Hitachi ARM, upgrade to: 2.0.3.10 1. Added family HUA7220CLA3, HUA7220ALA3, 5410A7 2. Fixed the bug that Hitachi IBM Utility would get stuck around 10s when entering the utility without HDD being connected Hitachi IBM, upgrade to: 2.2.1.0 1. Fixed the bug that Hitachi IBM Utility would get stuck around 10s when entering the utility without HDD being connected Toshiba Utility, upgrade to: 2.0.4.0 1. Added family MQ04ABF100, MQ04ABD200 Samsung HDD, upgrade to: 2.3.1.0 1. Optimization: If the number of heads read from EC during HDD initialization is 0, the number of heads will be obtained from ROM Samsung SSD, upgrade to: 2.1.0.0 1. Added family dialog box 2. Added loader selection list to family interface 3. Added translator creation by which the software enables the users to read data directly under factory mode with Loader being uploaded 4. Optimized and enhanced the following functions: 1) Basic status 2) Read CP in batch 3) Write CP in batch 4) Backup Firmware 5) Write to Firmware 6) Edit HDD ID 7) View chip information 8) Dump chip 9) View password information 10) Reset HDD password 11) Clear S.M.A.R.T. 12) Low-level formatting 13) Mount Loader 14) Dismount Loader 15) View HDD status Silicon Motion SSD, upgrade to: 1.2.0.0 1. Optimization and upgrading of the underlying architecture of the program 2. Optimized and enhanced the following functions: 1) Basic status 2) CP list 3) Read CP in batch 4) Write CP in batch 5) Backup firmware 6) Write firmware 7) Read service block 8) Edit HDD ID 9) View password information 10) View chip information 11) Dump chip 12) Clear SMART 13) Low-level formatting 14) Reset the SSD controller 15) Mount Loader 16) View SSD status 17) Create a virtual translator 18) Dump viewer 3. 1 loader resource added to 2244EN 4. 2 loader resource added to 2244XT 5. 1 loader resource added to 2258G 6. Optimized loader uploading function which now pops up a dialog box for users to choose loader Phison SSD, upgrade to: 1.0.5.0 Added entrance 1. The HDD family supported by AMD ASolid (Phison): Radeon R5 2. The HDD family supported by Corsair (Phison): Corsair, Corsair Force LS 3. The HDD family supported by Crucial(Phison)：Crucial V4 4. The HDD family supported by GOODRAM(Phison)：GOODRAM CX300, GOODRAM S400U 5. The HDD family supported by Kingston(Phison)： Kingston SMSM150S3, Kingston SSDNow UV300, Kingston HyperX Savage 6.The HDD family supported by Kingston2(Phison)：Kingston A400 7.The HDD family supported by Lite-On(Phison)：Lite-On MU3 8.The HDD family supported by OCZ(Phison)：OCZ Trion 100 9.The HDD family supported by Patriot(Phison)：Patriot Blaze, Patriot Blast, Patriot Spark 10.The HDD family supported by QUMO ASolid(Phison)：Novation 3D 11. The HDD family supported by Smartbuy(Phison)： Smartbuy Ignition 2, Smartbuy S9M, Smartbuy Revival, Smartbuy Firestone, Smartbuy Ignition 4, Smartbuy Revival 2, Smartbuy S11T 12. The HDD family supported by Silicon Power(Phison)： Silicon Power Slim S55(PS3108), Silicon Power Slim S55(PS3109), Silicon Power Slim S55(PS3111), Silicon Power Slim S60 October 30th, 2019 MRT 2141 version, version number: 2.1.4.1 1. This upgrade is free for 2.1.4.x users. Western Digital, upgrade to: 2.2.8.1 1. Add the decryption of the 80022 self-encrypted disk. 2. Fix the problem that the new headmap creation by command fails for most of the high-capacity drives. 3. Fix the failure resulted from improper operation with SN and DCM under ID edition. 4. Fix the problem that the batch save module function will crash when the module is not selected. 5. Fix the issue that,by ID method,software will read only part of data of 190 module. 6. Fix the problem that ldr interface turns inoperable when loading the microcode. 7. Optimize the creation of the folder, displaying the creation time of the folder. SSD Silicon Motion series program, upgrade to: 1.1.3.0 1. Fix the problem that the 2246xt series is often busy after loading the loader. 2. Fix the problem that the last step can't be completed when creating the virtual translator for specific drives. 3. Optimize the processing speed of method 1 for creating virtual translator. 4. Optimize the safe mode guide for the drives that remain busy when loading the boot-up microcode. Seagate F3, upgrade to: 2.0.4.2 1. Optimize Smart Compatibility(SSHD). 2. Optimize the issue of "Not supported or ROM modified" when trying to cut the head. 3. Optimize the analysis of special data in CHS test. 4. Optimize compatibility of Glist. 5. Optimize "Inappropriate Parameters" dialog box reported by list control. 6. Optimize virtual boot compatibility(writeLDR patch). 7. Add MCMT, SIM1009, busy after getting ready(this one is added to common terminal command) which were deleted before. DE, upgrade to: 2.3.5.5 1. Optimize the VHD function of DE 2. Optimize the data browsing function of DE 3. Optimize the data copy function of DE August 23nd, 2019 MRT 2131 version, version: 2.1.3.1 1. This version adds SSD utility and the activation of SSD utility will cost user another fee, for the upgrade log please refer to the SSD section of 2.1.4.0 version 2. Features exclude SSD utility are the same as 2.1.3.0 version August 25th, 2019 MRT 2140 version, version: 2.1.4.0 1. This version adds SSD utility and the activation of SSD utility will cost user another fee. 2. This version adds VR(Data Recovery for Video Recorder) Utility 3. Interface icons have been redesigned 4. Layout of interface has been optimized 5. Sleep and Awake button have been added in the main interface SGT Utility, Version: 2.0.4.0 1. Adds a double progress bar 2. Adds a com port switch button on family interface 3. RAM initialization info will be displayed in the log 4. RAM update has been added in Basic Status 5. Edit ID has been added in RAM operation 6. Adds the display of baud rate 7. Adds automatic sequence of system files 8. Support for head map of HDD with more than 10 heads 9. Support for sending multiple commands with one key （refurbishment） 10. Support for head shield of new families(ID:0x59 6 heads) (refurbishment) 11. Offers the possibility to add defects in the form of LBA into P list(8 categories)(refurbishment) 12. Adds removing diagnostic lock of 0x63（ST1000NM0033）、0x70(ST4000DM000-1F2168)(only works in RAM) 13. Support for backup of system files in batch 14. Adds descriptions of system files(descriptions for vital modules and sys files) 15. Support for editing SMART parameter(refurbishment) 16. Adds family 0xAF (brand new family) 17. Support for ROM operation of LM035-EB01 18. Support for firmware unlock and virtual start of LM035-EB01 19. Important update: a special firmware designed for SBM3 and SDM1 -Minimized system that offers solution for power-on LED issue -Embedded Overlay that offers solution for overlay not able to be loaded or refreshed 20. Adaptation parameter can be written into RAM(refurbishment) 21. Optimizes the compatibility of Password Remove 22. Optimizes the function lab of serial port(for improving user experience) 23. Optimizes the algorithm of head adaptation program 24. Optimizes the switch between different R/W modes(adds new shortcut buttons) 25. After headmap creation, Seagate utility will automatically switch to ATA mode 26. Optimizes the convenience of Read/Write operation of sys files 27. Fixes the error that software reports ROM Has Already Been Patched when trying to unlock or use virtual start for some HDD belonging to family 8C and A5 28. Fixes the error that it may fail to obtain headmap in RAM(Family ID:0x58) 29. Optimizes the process of obtaining family ID 30. Fixes the possible software corruption when adding defects into P-list 31. Fixes wrong identification between LM drive and non-LM drive in automatic translator regeneration 32. Bootcode mode has been integrated into RAM Tool and ROM Tool WD Utility, Version: 2.2.8.0 1. Adds new family Spyglass（800041）,Plamer（800066）, Charger 2. Optimizes the module 01 analysis to avoid disorder of ABA address (800041,800066.etc) 3. Support for headmap creation of HDDs with PCB ver.800041,8000066 4. Support for editing headmap in RAM for HDDs with PCB ver.800041, 800055, 800066 5. Enhances Slow Start Fix 6. Adds a new feature for fixing quick failure when scanning drives 7. Adds a new diagnostic mode which has a better compatibility with more drives and also provides auto-test 8. Adds a detection of whether SA translator is loaded during boot-up process 9. Adds one key button for selecting all heads in head test 10. Adds a prompt when Resource Backup attempts to overwrite files already existed 11. After SA structure test, software will display the test method(ABA,track or ID) 12. Optimizes USB decryption process 13. Optimizes the module list (1) Module list is now able to display all the copies of modules simultaneously (2) Disable Backup Tool button when ByID or ByMem is selected (3) Module list won't refresh when switching between different R/W modes (4) Buttons for Read/Write mode have been moved into module list page 14. Modules will be automatic sequenced according to ID 15. Optimizes the level of file path, making it more simplified and well categorized for convenience 16. Optimizes the conversion between ABA and CHS address 17. Optimizes the function logic of SA Module Search which could now auto-skip bad sector;Enhances the rebuild of 01 module(moved to the right-click menu in module search dialog) 18. USB data decryption renamed as SED Status Switch 19. Optimizes the mechanism of automatic obtaining HDD ID 20. Reconstruct the infrastructural interface of serial port(support for new serial device) 21. Menu has been redeployed and classified so as to make it more convenient to use the program 22. Module offset has been redesigned and is now able to shield bad sectors automatically 23. Resource Viewer has been redesigned to support for multiple tasks 24. Mrt Hex has been optimized which could now be applied to various task environments Hitachi ARM Utility, Version: 2.0.2.10 1. Adds family 7210A9 SAMSUNG Utility, Version: 2.3.0.0 1. Adds Head Test 2. Adds SA Test which offers a series of test combinations 3. Adds importance mark for each module 4. Adds a prompt when resources are to be overwritten 5. Adds View BURN Report 6. Adds Set features 7. Optimizes the process of A-list to S-list 8. Optimizes S-list Rebuild 9. Optimizes Zone Edit 10. Optimizes the prompt of log info 11. Optimizes the layout of functions 12. Optimizes Write Burn Resources, adds resources auto-select 13. Fixes some bugs in relation to Edit Defect List DE Utility, Version: 2.3.5.0 1. Support for UFS file system 2. Support for VMFS file system 3. Adds a diagnostic mode for DE(file explorer mode) 4. Support for manually editing MFT parameter 5. Support for editing file parse node 6. Support for diagnosis of MFT 7. Support for MFT stream scanning and file index format 8. MFT scanning has been redesigned 9. Optimizes the mechanism of saving bad files VR(Data Recovery for Video Recorder) Utility, Version: 1.0.0.0 1. Support for clone of Hikvision video 2. Support for viewing files of Hikvision video 3. Support for file stream scanning of Hikvision video SSD Utility: Silicon Motion Utility, Version: 1.1.3.0 1. SM2246XT (1) Support for Silicon Power Slim S55 (2) Support for Silicon Power Slim S60 (3) Support for CFast Lexar Professional 3400x (4) Support for uploading LDR for SM2246XT (5) Support for creating virtual translator for SM2246XT 2. SM2246EN (1) Support for Crucial Bx100 (2) Support for Crucial Bx100 (3) Support for PNYCS1111 (4) Support for Corsair Force LX (5) Support for RevuAhn 900T PRO (6) Support for RevuAhn 880K (7) Support for RevuAhn 850X (8) Support for uploading LDR for SM2246EN (9) Support for creating virtual translator for SM2246EN 3. SM2256K (1) Support for ADATA SP550 (2) Support for AMD Radeon R3 (3) Support for uploading LDR for SM2256K (4) Support for creating virtual translator for SM2256K 4. SM2258(G,H) (1) Support for ADATA SU800 (2) Support for Plextor S2C (3) Support for uploading LDR for SM2258(G,H) (4) Support for creating virtual translator for SM2258(G,H) 5. For supported Silicon Motion drives,the functions listed below are available: (1) Support for Chip Info View (2) Support for Password checking (3) Support for Check SSD status, such as the working mode of Firmware (4) Support for displaying SSD status info in bootup log,such as the quantity of channel,chip,logical unit,block,page and chip ID,SSD capacity (5) Support for searching and reading of each CP Phison PS3111 Utility, Version: 1.0.0.0 (1) Adds information log (2) Adds program initialization (3) Adds Read/Write of CP (4) Support for creating virtual translator Jan 29th, 2019 MRT 2130 version, version number: 2.1.3.0 1. Optimize main program notification function, the prompt will appear in the lower right corner and allow users to cancel the notification message. 2. Add full support for new MRT USB terminal , which can automatically detect and set the terminal voltage (need to upgrade to new terminal) 3. This upgrade is charged Western Digital Utility: 2.2.7.0 1. Support for the new Marvell 88i10XX and LSI TT67XX controllers has been added to the Boot-ROM mode; 2. The data transfer speed has been increased in the Boot-ROM mode. Both loader and Upper program have been optimized 3. 1961 (WD10JMVW) has been added into support list of USB decryption 4. Add a new family: Apollo 5. Re-program the RAM Headmap Editing function, in which the HDD with board ver.800022 has been added, which meanwhile enhances its compatibility with some drives previously not well supported 6. Enhance and optimize the HDD ID Editing function, add editing options for three major categories: Features, SED, SMART features 7. Enhance Clear SMART function, add two more ways to clear SMART 8. Enhance and optimize LDR uploading 1) Add the option of uploading module 01 to HDD RAM while updating SPT option 2) Add the option of uploading module 02 to HDD RAM while fixing slow response issue 3) Add one key solution which automatically uploads all microcode module once and for all. 4) Modeless Dialog is now available in this session 9. Re-program the function of Creating LDR File to solve compatibility issue with some drives previously not well supported 10. Re-program the function of Loading Module List from HDD, which is now renamed as Loading module 01 into HDD RAM. In addition to the modification above, three more options have been added in this session: Uploading LDR;Uploading module 02 into HDD RAM;Enable the Access to Service Area in RAM 11. The function of Disabling Access to Service Area has been optimized which now would disable the service area access of all heads 12.The tips of 02/411/30 being disabled has been added in Bootup process 13. The tips of service area access being disabled has been added in Bootup process 14. The Voltage Setting for newly released com-port device has been added 15. ROM Headmap Editing function has been optimized 16. The working mechanism of Editing ABA Range has been optimized where the tips of service area access being disabled or enabled has been added DE Utility, version: 2.3.4.4 1. .FNM and .QFNM are added to the task file. 2. Fix the problem that "Marking Effective Partition" feature would possibly crashes under certain circumstances Seagate F3 Utility, version: 2.0.3.3 1. The solution for repairing Rosewood(LM) sector access interruption has been added,which requires the assistance of Virtual Start(Original Firmware is needed) 2. The solution for repairing Rosewood(LM) sector access interruption without backup has been added,which currently cannot be applied to the HDD with 3 heads 3. Add virtual start family:0x63(NM0053),0x91(NM0055,VX0023),0x72(LM000, LM024),0x9B(DM004,DM005),0xA0(VX000,DM004),0xAD(DM008) 4. Newly added family: 0xA0,0xAD 5. Add terminal voltage adaptation 6. Add 3M, 6M baud rate 7. Add the function to delete Firmware Unlock Code in ROM Tools(Only applicable for the patch made in and after ver. 2.1.3.x) 8. Add the function to delete Virtual Start Code in ROM Tools(Only applicable for the patch made in and after ver. 2.1.3.x) 9. Modify the system file size to be displayed by sector 10. Optimize ABA Read/Write mechanism for system file 11. Optimize the backup scheme to ensure files obtained from copy1 would not overwrite the files from Copy0 12. Optimize the way status information displays in the Hex editor 13. Optimize the print information of automatic adaption Samaung Utility: 2.2.0.0 1. Optimize the startup process and increase the startup speed 2. Editing headmap has been optimized to acquire better compatibility with old HDD(T166S, M40S, M60S, M80S, etc.). The failure of obtaining module 9D has been fixed 3. HDD Initialization with Headmap Editing has been optimized to acquire better compatibility with the old drives (T166S, M40S, M60S, M80S, etc.) 4. View Rom Information has been optimized to have better compatibility with the old drives (T166S, M40S, M60S, M80S, etc.) 5. Fix the issue that Quick Start Last Task only supports a part of functions in the menu(such as "View Rom Information"), and most menu items are now supported. 6. Optimize the functions such as "View Module", "Backup Module", "Backup Track", "Batch Write Track", "Batch Write Module", "Hard Disk Resource View Edit" to display all the heads when operating 7. Add verification when Read/Write ROM 8. Optimize the utility to ensure HDD will not turn bsy or fail to obtain module list when trying to get module list after the ROM has been written into HDD. 9. Optimize ROM data source dialog,three options are now available: database, file, hard disk 10. Add the function of Automatic ROM Save which enables a part of ROM reading relevant task to automatically save a ROM file to the working directory under the folder of AutoSave 11. Optimize the utility to ensure entering Debug mode forcibly upon failure (which may cause the hard disk to be unstable) 12. Optimize the utility to ensure T166S family to obtain correct S defect list 13. The voltage setting for newly released com-port device has been added 14. Add new supported model: HD753LI, HD322HI, HD252HJ August 30th, 2018 MRT 2128 version, version number: 2.1.2.8 1.This version is free for users who are using 2.1.2.X 2.Added several SSD repair tool 3.Virtual boot are supported in more Seagate families, and improve serial port read and write stability. Head shielding is supported in 9YN series. 4.Added MrtHex independent hex editor, The menu is located in the main interface "Tools -> Open Hex Editor" 5.Redesigned the main program icon 6.Supported read firmware and write firmware by DMA 7.A new hardware compatibility detection tool has been added, located in MRT installation directory "MrtTool.exe" Added MrtHex independent hex editor, initial version: 1.0.0.0 1.In MRT main interface, elect "Tools -> Open Hex Editor" to visit 2.File editing functions: copy, paste, delete, cut, repeal, support to open multiple files, support file drag and drop. 3.Support to compare multiple files at same time 4.Support to customize the number of columns displayed 5.Count number of occurrences of 0x00-0xFF per byte 6.Find the specified hexadecimal data or string and display it as a list 7.Record the cursor position to position to the previous position and the next position WD utility, upgrade to: 2.2.6.10 1.Optimized load LDR function, solve the long wait problem caused by subsequent operations when the hard disk is busy after loading LDR Samsung utility, upgrade to: 2.0.1.8 1.Fixed the problem of writing ROM of HM500JI disk. Seagate F3 utilitu, upgrade to: 2.0.2.11 1.Added more families for virtual boot: 3A(ST1000524NS),3F(12 generation DM002),40(ST2000542AS),44(ST32000646NS) 2.Improved the stability of fast read and writing ROM under Bootcode mode 3.Improved the stability of writing 3D in virtual boot 4.Fixed the software crash after ABA writing. 5.Increased waiting time after automatic unlocking and power-off-on 6.Added power button in the second step of virtual boot 7.Added button to switch terminal interface on family selection panel 8.Fixed bugs in some interfaces 9.Added head cut function of 9YN series Added Plextor Marvell utility (SSD), initial version: 1.0.0.1 1.General features (including user sector viewer, database, ATA parameter settings, etc.) 2.View disk ID 3.View password 4.Reset password 5.Hard disk initialization 6.Dump chip data to file 7.View Dump Add Crucial Marvell utility (SSD), initial version: 1.0.0.1 1.General features (including user sector viewer, database, ATA parameter setting, etc.) 2.Basic information 3.Full backup of resources 4.Read ROM 5.Read firmware 6.Edit "Manufacture data" 7.View disk ID 8.Dump chip data to file 9.Low level format 10.View Dump 11.Backup module list 12.Module batch write Add Sandisk Mavell utility (SSD), Version: 1.0.0.9 1.General features (including freeze HDD lock, set HDD password, unlock or cancel password, user sector viewer, logic scan, database, ATA parameter Settings, etc.) 2.View basic information 3.Start the log process 4.Module list 5.View module 6.Write module 7.Batch read module 8.Batch write module 9.Read ROM 10.Write ROM 11.View chip ID 12.Dump chip data 13.Format STARs Add Sandisk Plus 2246xt utility, Version: 1.0.0.9 1.General features (including freeze HDD lock, set HDD password, unlock or cancel password, user sector viewer, logic scan, database, ATA parameter Settings, etc.) 2.View basic information 3.Get CP list 4.CP viewer 5.Batch read CP 6.View chip information 7.Dump viewer 8.DumpSaving 9.Clear SMART 10.Backup firmware 11.View password 12.Low level format 13.Load LDR 14.Reset SSD controller 15.Write CP Add OCZ series utility (SSD), Version: 1.0.0.0 1.Safe mode 2.Normal mode 3.Read firmware 4.Read ID 5.Dumps saving 6.Common features (including security subsystem, user sector viewer, database, ATA parameter setting, opening current working folder, etc.) July 3rd, 2018 MRT 2125 version, version: 2.1.2.5 - this update is a free version to fix bugs of version 2.1.2.3 - optimize photo and icon of installment program and "about" dialog box WD utility, upgrade to 2.2.6.9 - Optimize support for hard drives with 10 heads - Add function of loading module 0x1B (in the option of Load LDR from file), as well as optimize function of Load LDR from file, aiming to support 19xx series better, and after loading successfully, module list and service area SPT information will be updated automatically. Samsung utility, upgrade to 2.0.1.7 - Add function of using virtual RAM headmap to initialize hard drive - Optimize acquisition logic of module list Seagate F3 utility, upgrade to 2.0.2.8 - Fix crash bug when using virtual start - Fix the bug that one option was forbidden in function menu - Fix crash bug when unlocking firmware June 6th, 2018 MRT 2123 version, version: 2.1.2.3 - Upgrade the driver of Ultra, optimize the size of buffer - Increase system stability - This upgrade is not free WD utility, upgrade to 2.2.6.8 - Add USB decryption type of SW6316XTS (1927) - Add support to new family PebbleB - Add more series' writing/reading ROM under Boot Rom mode, including series of 1640-003v,1574,1931 - Add function of loading module 411 to RAM (under function of loading LDR) - Add function of enabling module 411 - Add function of disabling module 411 - Add function of collecting defects of user sector via CHS address - Add function of enabling/disabling module 02 - Add function of enabling/disabling module 30 - Add reading / writing by RAM shortcut button in right side toolbar, modules can be opened by RAM in module list - Add shortcut menu of turning on and off the service area - Add function of loading module list from disk and loading LDR automatically - Add function of repairing slow response in RAM - Add function of uploading module 02 to RAM (under function of loading module list from disk) - Add function of closing SA access in RAM - Add function of opening SA access in RAM - Add function of creating new module - Add function of modifying module size - Add function of deleting module - Optimize function of editing ROM head map, drives with 10 heads now can be supported - Optimize SPT acquisition logic to support drives with 10 heads - Optimize function of module list to support new module list structure Samsung utility, upgrade to 2.0.1.7 - Add RAM head map editing function - Add function of head map setting(in source download interface), can be used to shield head along with burn in test function - Add function of viewing ROM information, displaying ROM type, ROM verification, FIPS address size, Platform Id, headmap and other information - Add function of reading FIPS module - Add function of writing FIPS module - Add function of clearing FIPS module - Add function of entering/exiting Debug mode - Optimize terminal reading and writing interface - Optimize function of burn in test - Modify family selection interface, add enter/exit Debug mode button and auto detect family button Seagate F3 utility, upgrade to: 2.0.2.5 - Add support of unlocking to new families of: ID55(LM010),ID59(VM003),ID72(LM024),ID79(VM003),ID87(LM028、LM030),ID91(NM0055),ID94(DM002),ID9B(DM004,DM005) - Add support of high baud rate in virtual start, reduce virtual start time (exclude families ID59, ID94 etc.) - Add support of virtual start to new families of: ID55(LM010),ID59(VM003),ID63(NM0033),ID75(LT012),ID76(LT032),ID81(LM033,LM034), ID87(LM028,LM030),ID8C(LM007,LM035,LM048),IDA5(LM035,LM048),ID94(DM002) - Add virtual start option of Patch_ERR_WriteLDR to solve the problem that LM series can't write LDR (ERR in SATA status), the specific families are ID81,ID87,ID8C,IDA5 - Added patch function of family ID72-Kahuna_5400-SSHD (LM000,LM014) to solve the problem that no commands can be executed in serial port - Add support of reading/writing of drives with 4K service area - Add support of writing system file via ABA mode, providing a new method to solve user sector access interruption malfunctions, the specific families are ID8C(LM035),IDA5(LM048) - Add 4K detection of service area via ATA and serial modes - Add head adaption of Yarra1D(5F), Yarrar5400(75), Moose(27) - Add the number of drive heads that need to be initialized during initialization - Add 8M judgment of ROM size of families ID81(LM033,LM034),ID87(LM028,LM030) - Add function of head shielding of 9YN164 series of family ID58, and support to family ID59( shield head 0 is not supported, and must remain no less than 2 heads) - Add function of head shielding of family ID40 (Currently only supports hard drives with four heads) - Add function of modifying model of family ID75 (LT012) (by modifying module or corresponding system file) - Add function of shielding ZONE (by modifying ROM) - Add function of shielding head automatically (only generation 12 can be supported) - Add function of refreshing and writing of ROM tools - Optimize the naming rules of ROM saving (Data+Serial Number+Time) - Optimize the judgment rules of entering BootCode mode - Optimize the judgment rules of creating LDR - Fix LED malfunction when backup system file - Fix malfunction when baud rate is over 460800 - Fix 4K address transition when adding defects to G-list - Fix malfunction in virtual start that sometimes empty ROM will be written - Fix malfunction that sometimes options of reloading modules, system files can't be selected - In family panel, it shows supported important features of each family - Integrate functions of firmware unlock and modify model into ROM tools - Integrate function of ROM adaption into ROM tools - Add ROM tool, RAM operation into shortcuts bar - Delete firmware unlock mode one DE utility, upgrade to: 2.3.3.1 - Add map function - Add function of exporting data to specified target hard drives - Add function of exporting data to specified target folders - Add function of exporting list map to binary format - Add function of exporting binary to list map format - Add function of choosing random image address - Add function of file analysis calculator - Add function of operating target tasks individually - Add support of VHDX type of the target virtual disk - Add support of target virtual disk under 64-bit system - Add option to save bad file or not save - Optimize function of mounting when browsing tasks - Fix enumeration display of VHD devices under 64-bit system - Fix the wrong name of the saved bad folder Toshiba utility, upgrade to 2.0.4.0 - Add support of 3.5’ MG04ACA series - Add support to 2.5’ MQ03ABF075 series Hitachi ARM utility, upgrade to 2.0.2.9 - Add 3.5” HU_7240AL series - Add 3.5” HUA7230ALA6 series Database utility, upgrade to 1.0.1.8 - Optimize function of opening and closing logic - Optimize function of searching December 6th, 2017 MRT 2113 version, version: 2.1.1.3 - This update is chargeable - Add SSD utility (Beta) Seagate F3, upgrade to: 2.0.1.7 - Add ROM reading and writing in LT,LM series - Add firmware unlock of LT,LM series in the family ID of 5F,87,8C,A5 - Add firmware unlock of NM series in the family ID of 91 - Add virtual boot of family with ID 4F - Add arbitrary head cut for 1CH series of 14 generation - Add the support of loading LDR via serial port - Add the support of modifying model for most HDDs - Add head adaption of family with ID 72 - Support high baud rate when reading/writing ROM of family with ID 4F,55,59,76,7A,86,91,A5 - Add family panel (91,7A,A5) - Add manually modify configuration file when reading/writing ROM under BootCode (In the MRT installation directory, the file name is SGT-F3GBootCodeBRF.ini) - Optimize creating LDR incomplete issue of family with ID 56 - Add firmware unlock of family with ID 0x7A - Rebuild head cut method of 1CH family - Fix 03 module parsing problem of several HDDs - Fix check error of firmware unlock mode I - Fix the LED error during head cut of part 1CH disks (updated on 6th,December) Toshiba, upgrade to: 2.0.3.7 - Add family of HDWJ1 MQ01UBD DE, upgrade to: 2.3.2.2 - Add HFS+ file system parsing, based on GPT and DOS partitions (Apple file system) - Add function of creating compressed bitmap during data image (Range File) - Add saving bad files separately and automaticaly - Add support of mounting and file parsing of disk with capacity larger than 2TB - Support mounting source disk with capaciity larger than 2TB - Optimize GPT partition expansion function - Optimize NTFS system parsing - Add support to target disk of VHD type - Add version number of DE task file - Update MRT VIRTUAL driver, optimize driver transfer speed of disk with capacity larger than 2T - Optimize HFS+ system based on GPT partition - Optimize creating task file - Optimize create head map function WD utility, upgrade to: 2.2.5.5 - Add support for 1945, 1590, 1552 and other series in Boot ROM mode - Optimize automatic detection error bug of few families in initialize self test environment function - Add self-test extended tool for users familiar with self-test, can choose random combination process to do self-test Samsung utility, upgrade to: 2.0.0.2 - Add default module list for all series; Optimize access to module list; fix an issue that T166(S) series family module list fails to be acquired - Add support for M7E,M8E family in write burn resource function - Add the function of search burn resources in write burn resource, can search according to model, firmware version, Part Number (this data is showed in start process), optimization function panel - Add the function of using serial port to download resources (showed in resources download panel) - Add the function of using serial port to write ROM (showed in ROM panel) - Add "Start Burn-In test" function and "Continue Burn-In test" function of M7E family Database, upgrade to: 1.0.1.7 - Solve the issue of database import failure caused by language code in multi-language system environment SSD repair utility, version: 1.0.0.0 (Beta version) - This tool is the initial version - Include Samsung SSD utility, support Samsung 850,840,830 series. - Include Intel 510 utility, support Intel 510 series. - Include Marvell Controller utility, support SSD with Marvell Controller, such as Intel 320,710 series,etc. July 5th, 2017 MRT 170705 version, upgrade to: 2.0.5.7 - Fix the hardware card version display inaccurate problem WD utility, upgrade to: 2.2.5.4 - Fixed an issue that caused crash when loading module by ID with online ARCO - Built resources into the software Samsung utility, upgrade to: 2.0.0.1 - Optimize reconstruction of S-list - Optimize A-list to S-list - Optimize scan and adding bad sectors function,m7e and other families can hide bad sectors by scan - Optimize support for partial disk clear A-list - Optimize read and write ROM, add the support for M8E, M9T and other families - Built resources into the software Database, upgrade to: 1.0.1.6 - Optimize support for some Seagate hard disk backup firmware to database Seagate F3, upgrade to: 2.0.1.5 - Optimize the handshake rapidness - Optimize DWF options in virtual start - Optimize judge about ROM of some families has backup relationship - Optimize defect list editing menu - Optimize partial hard disk support BootCode - Optimize extensibility to create Loader(control with INI configuration file that is user-editable) - Optimize family 5F to create Loader - Add high baud rate support in BootCode mode (family ID: 0x87, 0x8C, 0x9B). - Built resources into the software - Optimize the function that adding defects to Non-G List - Optimize 03 module read, add read mode option (Tools -> Backup and Restore tracks -> Read SA ABA) - Optimize adaptation function to support the editing of individual adaptive parameters - Optimize access to family 94 system files - Add family 94 firmware unlock and virtual start - Optimize the LED problem when some family system files reading May 19th, 2017 MRT 170519 version, upgrade to: 2.0.5.6 - Optimize reading/writing error handing on WD hdds with MRT Ultra - Add online upgrade, users can obtain and input upgrade code independently - Add the function showing which ATA port the current process attaches to on title bar - Optimize new version reminder of update Seagate F3 utility, upgrade to: 2.0.1.2 - Add support for 4K hdds when loading G-list - Add Patch for Init SAMRT Fail，No HOST FIS-ReadyStatusFlags of ROM - Add arbitrary head cut for 5400.6, 5400.5, 7200.4 - Add repair function for 5400.6, using factory firmware to operate FMT in user area - Add clearing ATA passwords for part of LM, LT series - Add ROM reading and writing in BootCode mode for part of LM, LT series - Add virtual boot for part of DM series, which is used to deal with hdds that can not execute any command or show terminal error while the capacity is shown as 3.8 GB - Add creating virtual boot Loader file for DM series (using together with virtual boot) - Optimize DE creating head bitmap speed - Optimize terminal COM port usability, automatically memorizing the correspondence between ATA interface and COM port when using multiple COM terminals Seagate U5 utility, upgrade to: 1.0.1.8 - Optimize some functions Hitatch ARM utility, upgrade to: 2.0.2.7 - Optimize DE creating head bitmap speed DE utility, upgrade to: 2.2.2.2 - Add the new function of RAW recovery (for part format) - Add data recovery for compressed files in NTFS format - Optimize the function of searching partition in DE - Optimize the logic of viewing sector data when mounting task - Optimize the function of Toshiba's reading from utility in DE - Optimize the information display of system disk on DE panel WD utility, upgrade to: 2.2.5.3 - Optimize creating head bitmap speed - Optimize the decryption support for SW6316 series USB hard drives - Optimize family detection for Df2_veni - Add scan and shield function for SA bad blocks - Add ROM reading and writing in Boot ROM mode, support 1640, 1698 and other PCB model Samsung utility, upgrade to: 1.0.1.8 - Optimize the head bitmap for part of hdds from m7e,m8e families - Support creating head bitmap of M6S_2D, M40S, MT2 family - Optimize defects table display of some families - Optimize Zone table display of some families Database management tools, upgrade to: 1.0.1.5 - Add function of folder movement November 2nd, 2016 MRT 161102 version, upgrade to:2.0.5.3 - Add multiple controller card support, which enables users to install multiple MRT controller cards and run multiple MRT programs on the same computer. - Add main and vice card support, which makes it possible to install main and vice cards on the same computer. The vice card is used to extend the interface number, and it needs to be bound with the main card to use. - Added new Seagate F3 utility, which supports MRT Ultra and MRT Express controller cards. - Add prompt of finding software update of new version. Western Digital utility, upgrade to: 2.2.5.2 - Add new family support: Trailxlb, TRESXLB2, Inca, HubLT2, Hulk RE - Add the decryption function of the USB-encrypted mobile hard disks (This function can be used coordinated with sector viewer and DE. And this function can be seen in reading from utility in DE) ,which supports most of the mainstream HDDs, such as WD My Passport series - Add the function of retrieving password of the USB-encrypted mobile HDDs. This function can be used to retrieve the password when users forget the password (This function is in WD Marvell COM Port utility) - Optimize family auto-detection and soft reset in WD Marvell COM Port module; add COM re-connect interface in family interface, which makes operations more smooth. - Fix bug that caused the program to exit when USB HDDs are decrypted with running under a specific CPU - Add the decryption of the self-encryption type in the USB decryption function Database management tools, upgrade to: 1.0.1.2 - Optimize database access path settings - Optimize directory browsing - Optimize database and fix some BUG Samsung utility, upgrade to: 1.0.1.7 - Optimize log font and interface display Disk Scan utility, upgrade to: 1.0.1.5 - Optimize log font and interface display Fujitsu utility, upgrade to: 1.0.1.0 - Optimize log font and interface display Seagate utility, upgrade to: 2.0.1.1 - Add some new HDDs’ ROM reading and writing - Add the function of ROM fast reading and writing, which makes the speed of reading and writing ROM greatly improved, with just ten seconds - Add firmware unlocking of the DM family (Diagnostic Port Locked problem); support firmware unlocking for more models (such as Triangle PCB HDDs) - Add the file presence prompt when backing up - Add 11-generation, 12-generation automatic adaptation - Add the function of modifying 11-generation models to any string (11-generation and all notebook models supported) - Reconstruct Module 03 offset address algorithm - Reconfigure automatic switch of all function mode of F3 family. Users don’t need to manually switch the serial binary mode any more - Fix the problem of the power shortcuts baud rate’s not restoring - Remove the procedures of manually selecting 11 generations, 12 generations for some functions - Solve the problem of software crashing when shielding head and generating firmware - Solve the problem of program crashing when entering Seagate Utility DE utility, upgrade to: 2.2.2.1 - Add DE file mounting function. The DE task can be directly mounted as physical disk, and supports read-only mode mounting - Optimize task saving management mechanism - Optimize task initialization mechanism - Optimize copying interface management, speed curve and bitmap interface - Solve the problem of ATA port occupation May 28th, 2016 MRT 160528 version, upgrade to:2.0.4.9 - Add function of the "Mount Disk to OS" WD utility, upgrade to 2.2.4.1 - Add SA range and module 01 address editing in RAM - Add HDD ID editing in RAM - Add firmware reboot, modified module generated - Add HDD zone allocation checking - Support self test environment initialization for HDD with PCB version newer than 1640 version Samsung utility, upgrade to 1.0.1.6 - Add log of head map, password and so on - Add HDD capacity editing, integrated into HDD ID editing function - Add password checking - Add SA track erasing - Add S-list rebuilding from D-list and T-list Disk scanning tools, upgrade to 1.0.1.4 - Add quick test function with 3 test modes for quickly detecting status of certain LBA. - Add HDD self test - Add NOP cyclic sending Database management tools, upgrade to 1.0.0.1 - Add database access setting - Add file and folder search - Add database back-up Seagate F3 utility, upgrade to 2.0.0.12 - Add logic head map editing in RAM - Add logic head maps editing in RAM - Add SAP flag editing in RAM - Add "format flag" clearing - Add non-resident DST-list editing - Add system files in batches writing simultaneously - Add SA command list searching and error displaying - Add adaptive parameter modifying - Add Generation 11 HDD head shielding (only support shielding last heads) - Add function of LBA directly transforming into the format of P-list - Recreate P-list editor and rename it as 03 module editor (support track defect list,Servo defect list,P-list) - Add function of modifying any HDD model number of Generation 11 - Add firmware diagnostic mode unlock of Seagate HDD - Optimize reading/writing ROM in BOOT CODE mode - Optimize some function including shielding head Data explorer, upgrade to: 2.2.1.0 - Optimize Operation of task file saving. - Optimize File saving function in "file explorer" (file rename). - Optimize File image and copy with head map. Hitachi ARM utility, upgrade to: 2.0.2.6 - Add "CHS Defect List Editor" and "LBA Defect List Editor" - Add "G-list Edit" Hitachi IBM utility, upgrade to: 2.2.0.4 - Optimize "Backup Module Object" function. - Add "Select From Database" in "Writing Modules" option Toshiba utility, upgrade to: 2.0.3.6 - Add support for the following new families:59GSMP 59GSM MQ01ABDH MQ01ABDF family. - Add "Select From Database" in "Write CP" option Fujitsu utility, upgrade to 1.0.0.9 - Add SA self-test - Add module structure test - Add RAM module reading/writing - Add database manager February 1st, 2016 MRT 160201 version, upgrade to: 2.0.4.8 - MRT Ultra support for high-speed PCIE slot - Add Utility for supporting WD USB hard disk - Add Utility for supporting COM port to read/write firmware of WD hard disk - Add function of showing status of MRT Ultra slot - Add display for remaining days for using MRT online version - Set drive C as default storage path for saving firmware and MRT users can reset it as well Disk scanning tool, upgrade to: 1.0.1.3 - Add low resource occupancy mode as default for MRT Ultra. When scanning disk in low resource occupancy mode, the occupancy rate of CPU is low, which makes task efficiency much higher. - Optimize some details for Disk scanning tool. Seagate F3 Utility , upgrade to: 2.0.0.8 - Add function of shielding head of Seagate F3 series hard disk.(only support MRT Express and MRT Ultra) - Add functions of deleting specific item type in P-list editor(Specific for shielding head of Seagate hard disk ) - Add exclusive Seagate F3 disk scanning function and concerned editing LBA deficit- list function - Optimize ROM tool interface - Add functions of selecting ROM module and head adaptive - Add function of decrypting ST500L series hard disk - Increase success rate of head parameter adaptive in Seagate ROM change auxiliary tool and support more a dozen of Seagate family - Optimize P-list editor and no more support CHF file but RPM file - Optimize LDR function and create commonly-used Loader. - Add the function of scanning with low resources occupancy in disk scanning tool - Add the function of editing physical head map in RAM - Fix the problem of occasional backing up system file failure WD Utility, upgrade to 2.2.4.0 - Add support for the following new families:Sdb6GM, Sadl 6MR, Tresxlb, DF1_PL, Df2_PL4K, Df2_veni, Df4 PL3K, Df4 PL4K - Add WD USB utility to operate firmware of WD USB hard disk - Add support for reading/writing firmware of some USB 3.0 families, for example, Firebird, Zephyr, Denali etc. - Add the function of scanning device and refresh list from Device Manager in USB module. More convenient to use. - Add function of initializing auto self-test environment, which can initializing self-test environment with one click and online self-test hard disk or create 28 script module and open self-test hard disk offline - Add new self-test monitor interface and optimize self-test monitor logic so that monitoring data can be more accurate. - Reconstruct core code working mechanism - Optimize online ARCO function so that online ARCO function can better support - Optimize function of clearing S.M.A.R.T so that clear it more thorough and more all-round - Optimize 28 script module editor Samsung Utility , upgrade to 1.0.1.5 - Support Samsung 1.8 family such as HS12YHA and so on - Support some family of HD1031, HD501LJ and so on - Support selective head image of M8E 2.5 family Data Explorer, upgrade to 2.2.0.9 - Reconstruct file imaging and file parsing in DE and make it more stable and efficient based on MRT 150930 version. - Optimize function of copying data into image and system disk by reading utility. - Redesign function of searching partition in DE - Redesign function "filling the target sector" and modify map selecting panel which can fill in all map type - Optimize function of task creating in DE - Redesign function of DE visual partition in DE - Optimize function of checking head map block - Optimize function of dealing with timeout of backward read in task of parsing file - It can support Linux system to identify, save file and check first sector under Gpt partition and dos partition. - Optimize operation mode of list control in the interface in the task of parsing file. - To right-click list control in the interface is not to parse the first sector in the task of parsing file - Rewrite function and logic of saving file, New function of saving file has interface showing remaining file numbers and their size and countdown interface. - Redesign logic and layout of function of log and basement of it - Add two functions in log page, one is checking specific character string and another one is checking next specific character string - Support Linux file system. Hitachi ARM, upgrade to 2.2.0.5 - Add function of shielding head for MRT Pro and MRT Express Toshiba, upgrade to 2.0.3.5 - Add function of all MQ family series for MRT Pro and MRT Express. September 30th, 2015 MRT 150930 version, upgrade to: 2.0.4.6 - fix the problem “when opening multiple MRT processes, canceling the last process will lead to the crash of other processes” - optimize the underlying library for MRT Ultra 5-port card, fix the multiple transmission problem for 5-port card. - update the calculation method of machine code and registration code, fix the problem that registration code can easily lose effect. - add support for 64 bit Windows OS in MRT Ultra 5-port card ROM programmer tool, version: 1.0.0.5 - add support for 1.8V chip Data Explorer, version: 2.2.0.8 - add the menu of “top-speed mode”. In top-speed mode, the actual copy speed can be up to 123M/s for 2-port card, 480M/s for 5-port card - fix the error in progress bar after opening DE for many times - add target disk info in the title bar of DE task - change the stop logic of read with active MRT utility. In the case of slow block, the task can be the stopped quickly - add progress bar for the function “search partition” - upgrade the functions “scan MFT”, “search partition”, “view the size of file” - fully upgrade the function “reverse copy” in file parsing task - fully upgrade the function of processing bad tracks in file parsing task - solve the problem of crash caused by using the mouse wheel after exiting DE utility - solve the problem of memory loss in file parsing task - solve the problem that there prompts error infinitely when MRT image failed to be created in DE - add support for “read block size = 2016 sectors” to enhance the copy speed of MRT Ultra 5-port card. - reduce the times of reading/writing memory at file image to improve the efficiency. - modify the display style of waveform for speed, so as to make it self-adaptive for displaying - when target disk of image is mounted on the system, after modifying MBR, the enable/disable target device is changed to be automatic now, which does not require manual operation WD module, version: 2.2.3.7 - add support for new families about editing RAM head map - add selective protection mechanism for writing track to make it more convenient to use - revise the function of formatting SA tracks - add support for editing capacity of HDD with 4K firmware structure - add the function of clearing translator - load test code from file for ARCO - add log view function for 46, 69, 6A, 6B and other ARCO processes - revise the function “edit RAM head map”, add support for old model HDD in memory diagnostic tool - add PST process log view function Toshiba, version: 2.0.3.4 - supports clearing SMART in IDE hard disk - update database of 34GAX, change to read by ATA - supports reading by ATA for all series, since then Toshiba hard disk doesn’t need terminal COM port to read/write firmware - re-write structure analysis of 1.8 " Toshiba - update zone table size parameters of 1.8’’ Toshiba in database, change 1 sector to 2 sectors Hitachi ARM, version: 2.0.2.4 - fix the bug of incorrect prompt of sector editor - revise the function of editing LBA - add the function of clearing P-list - add the function of shielding head (only in MRT Ultra 5-port card and MRT Express 2-port card). Hitachi IBM, version: 2.1.0.4 - fixed the bug of incorrect prompt in sector editor - change ROM size in HTS5432xxL9 database April 18th, 2015 MRT Pro 150418 version, version number: 2.0.4.3 - Add support for MRT new 2-port card - Add support for 64-bit Windows operating system (only in new card) - Add support for multi-process. Multiple MRT processes can be run at the same time without affecting each other. (only in new card) - Update driver program with more stable performance and less system resources occupation. The new driver program contains digital signature of MRT Lab Data Explorer, version: 2.2.0.6 - Add support for Persian and some other codes - Optimize HDD status handling in error handling - Fix the crash at File Explorer Western Digital, version: 2.2.3.5 - Add the function "Edit ABA range" (integrated to editing ROM module) - Add support for new families: Draco, Giant, Bigbear - Fix the problem that can't load Module 10 when loading LDR from database Toshiba, version: 2.0.3.2 - Add support for editing P-List, shielding head/zone in MQ01ABD series (only in new card) February 5th, 2015 Mrt Pro 150205, version: 2.0.4.2 - Rewrite low level library, add multiple-hardware support. Western Digital, version: 2.2.3.2 - Add support for COM program, users can use COM port instead of ATA port to repair disk firmware - Add the feature of factory read in COM program (DE can copy data in factory mode) - Add the feature of editing ROM module (users can edit the address of module 01, headmap, SA defect list etc.) - Optimize the resource integration mode of loading LDR, add integration for module 10 - Optimize the method of selecting file to write ROM - Add main progress bar - Revise font and alignment Database management tools, version: 1.0.0.9 - Add support for importing FDB file - Fix occasional crash when saving & compressing file to database Fujitsu, version: 1.0.0.7 - Add support for creating headmap in 49-bit address large-capacity hard drive Disk Scanning Tools, version: 1.0.1.0 - Add brute-force decrpting HDD, for enumerating HDD password - Add setting HDD feature (e.g. Enable write cache) - Fix the crash caused by defect file locked when scanning Samsung, version: 1.0.0.4 - Fix the crash at "Getting HDD ID" on startup screen Hitachi IBM, version: 2.1.0.3 - Modify the initialization process of IBM 3.5' hard drive - Add progress bar on the main interface - Fix the bug that program crashes when appending LBA to G-List - Improve head test - Fix the data of NVRC size in module list - Fix the incorrect prompt of P-List viewer - Revise detailed report of SA structure test to amend the reported data - Revise SA overall offset to fix the bug of offset failure - Revise the function of reading RAM in batch - Revise the function of loading LDR, remove the option "Load zone" - Revise the function of calibrating NV entry address, modify the operational logic of it - Revise the function of "Re-identiy device" to make HDD info re-identifiable without exiting program - Fix the incorrect display of progress bar when reading/writing module - Optimize log font Hitachi ARM, version: 2.0.2.3 - Add NV-RAM viewing panel, modify the icon of data source selection button - Add annotation for module RAMI in module list - Add shortcut of module list - Add main progress bar in the main interface - Revise the function of "Re-identify device" to make HDD info re-identifiable without exiting program - Revise HDD unlocking of ARM - Fix the incorrect display of progress bar when reading/writing module - Fix the incorrect display of P-List viewer, add two displayed data segments - Optimize log font Toshiba, version: 2.0.3.2 - Change log font to make log characters align Seagate U5 Series, version: 1.0.1.7 - Add the feature of viewing HDD password - Add the feature of clearing password Seagate F3, version: 2.0.0.4 - Add the feature of editing non-resident G-List, LBA file and PBA file can be imported (4k disk does not support importing LBA file, adding LBA segments, or adding PBA segments) - Add rapid removal of non-resident G-List (ATA, ABA, serial port (only 7200.12)) - Improve ROM tools. Check is divided into check selected area and check entire block. The speed is faster. - 7200.11 disks can create LDR, write LDR by ATA. Fix the bug occurs when writing LDR in former version (writing by ATA and writing by serial port can both work properly) - Improve diagnostic mode -- SA test and repair - Add read/write sys file by ATA for 7200.11 disks - Improve P-List editor, the adding/deleting speed is faster - Add the feature of shielding bad tracks by head - Add the feature of shielding bad tracks by zone - Add the feature of editing physical headmap - Add the feature of editing SAP control flags - Add the feature of fixing sim error 1009 - Fix the problem that some disks report serial port error when getting sys file - Improve P-List editor to make adding/deleting speed faster. Users can delete entries by head/cylinder - Add the feature of backing up system files in batch - Fix the incorrect position of checksum caused by SAP/CAP division in ROM Data Explorer, version: 2.2.0.6 - Adjust skipping logic: "Skip 0 sector" indicates do not skip, i.e. continue to read next sector; "Skip 1 sector" indicates skip the following setor and read the next. - Optimize error handling. Improve the performance of error handling and the accuracy of reading. - Add error handling after backward reading error or backward reading timeout - Add error handling and timeout handling for retry. - Change the format of map file to make it fully compatible with that of PC3000 UDMA (Binary file format). Users no longer need to use PC3000-to-MRT task map conversion tool. (DE of this version is not compatible with former DE task files. It doesn't support the map format of "List of rangs".) - Change head block to non-modal dialog box for easy viewing. - Improve the feature of creating virtual partition. - Solve the problem that deleting task directory leads to saving task file failure when automatic saving is set - Fix the total LBA error when scanning partition - Fix the error of heads number. - Fix interface stuck when multiple interfaces tiled - Fix occasional crash at rapid expanding file. - Fix file parsing error - Fix system stuck caused by exhausted memory when doing file image in Windows XP - Optimize creating headmap, fix error of head number - Solve the problem that invalid partition is created when there is parsing disk LBA error caused by disk data error - Fix the error caused by saving data failed - Solve the problem that other windows cannot be operated properly at the window of sector map and speed curve - Solve the problem that the program cannot stop skipping after task is stopped or disk is powered off. - Add the feature of searching partition - Add the custom option for creating task name when creating task - Add the feature of modifying port of source disk when opening a task - Add the prompt of retry count and "skipping" in task status at read error retry - Add the feature of filling target disk by sector status - Add the display of sector status for easy reading, the status of sector pointed by mouse can be displayed in characters - Fix the crash at expanding root directory of partition September 20th, 2014 Mrt Pro 140920, version number: 2.0.4.1 - Rewrite Seagate F3 module (beta) Data Explorer, version: 2.2.0.1 - Modify backward read mode for skipped area - Fix the fault arises when setting factory program in special cases - Fix the bug of automatically deleting files after skipping - Fix the bug “program cannot be exited when clicking Pause immediately after clicking Stop task” - Remove the option "Run factory program" when creating task - Add the option “Create partition head map” - Add the options “Create virtual partition” and “Delete virtual partition” - Add the option “Automatically create task name” - Add support for GPT partition - Optimize parsing and scanning NTFS - Establish global MFT entries corresponding table, optimize the speed of scanning and parsing - Add the function of viewing and editing data template - Add data template in sector editor - Add right-click menu for sector editor status bar - Modify the control “file list” to make it consistent with operating habit - When positioning sector at disk image, there will be a blue border at the sector jumped to, with a character “x” inside marking it. It will not disappear even when mouse entering the border. It is more convenient for viewing. - Add the function of counting nodes size in file tree, supports NTFS, FAT32 / 16/12, exFAT file systems. - Count the total size of multiple marked nodes. (When counting marked size, you cannot select root node. Counting folders size in multiple partitions is supported) - After modification of file tree operation, we adjust the operation of scanning partition accordingly. - Creation time of recovered file will be the same as the time it was created, not the time when it was recovered. - Fix the fault that “factory mode cannot be exited after setting task transmission mode” - Cancel the default checked status of “soft reset” when creating a task - Optimize the function of counting multiple selected files - Change the default task name to “Rename” when creating a task - Fix the fault that “GPT partition can be identified but cannot be expanded” - Fix the fault that “when another DE task is browsing files, the existed DE task doing file image would crash” - Allow interface operation when scanning file system and marking valid data of partition - Unify the operation of marking valid data and scanning partition. They both can be done only when partition expanded - Optimize LBA conversion interface and operation to make it more convenient to operate - Support task name with a maximum length of 128 characters - Fix the fault that “Root node cannot be expanded after scan terminated” Rewrite Seagate F3 utility, version: 2.0.0.1 - Add P-List translator - For some of HDD families, support to get module list when ATA is not ready. Support by serial port method to read and write module - Add reading and writing system file . 12 generation and above, it supports ATA method, serial port method, ABA method to read and write. 11 generation, it supports ABA method to read and write system file - Changing ROM Tools, it can edit CAP, SAP, RAP. - It supports to back up module CP ROM tracks files to database, and read from data function - Support back up ROM by serial port method. Support back up ROM by system files method - New method of getting tracks list - Revise reading and writing bug (The problem of reading and writing cache is too smal of some HDDs) - Add scan and repair of tracks. Add scan and repair of ABA - Provide more detail report of reading and writing tracks error. (It can reports the reading and writing error in a specific sector of tracks and if it is searching tracks error or sectors error) - Add quick clear password function - 12 generation and above, it supports to create LDR and write LDR by ATA method, by serial port method and by ABA method. - 11 generation, it supports to create LDR and write LDR by by ABA method. It also support to create LDR from tracks - Read and write tracks by ABA method. It can handle cross-track and heads problem - It supports to get system files list by ATA method and serial port method - Add test mode. It can repair some problems - View password - Add a subdirectory to the default directory folder based on the previous one. Named for the family member ID. - Add automatically identify new family buttons in family selection dialog. When it is in the normal mode, it gets family name by ATA. When it is in the terminal mode, it gets family name by termianl - Add one click to clear the password button. It supports some of HDD families. - Add database function - When you power on, it sets the terminal baud rate to 38400 automatically. - Fix common terminal commands bug - Fix P-List editing buf. Add deleting the specified type entries function. Support Deleting multi-selection - Fix ROM tools bug - Click ABA method to read and write system files, it will enter serial binary mode automatically. - Exit serial binary mode will also remove the selection of ABA method to read and write system file - Add writing ATA instructions directly when Write LDR. (Using this function when HDD is ready) - Add repair Init Smart Fail function - Add repair MCMT function - Optimize some details Hitachi ARM, Version: 2.0.2.0 - Modify toolbar icon of main interface - Revise the decrypting function. Add the function of backing up ROM, which only supports decrypting of HDDs with 3 heads or more by now. - Fix the bug that prompt in function button on main interface Hitachi IBM, version: 2.1.0.0 - Revise the function of shielding heads (supports all notebook hard drives of new series with SATA interface) - Revise the function of redefining master head mannually - Revise the function of generating Zone - Add NV-RAM viewing panel. Fix the bug of loading NV-RAM from database error. Modify the button icon of selecting data source on NV-RAM viewing panel - Add the function of clearing defects translator - Add the shortcut menu of viewing modules list - Add the function of translator regeneration - Revise the function of clearing P-List and G-List, transforming G-List to P-List - Revise the funciton of writing back modules in batch. Fix the bug of incorrect message on selection panel of writing back modules - Revise the function of SA structure test - Modify the toolbar icon of main interface - Fix the bug that prompt in function button on main interface Toshiba, version 2.0.3.0 - Revise G-List editor for Toshiba series HDDs. It supports G-List viewing, editing and writing back. - Revise the function of transforming G-List to P-List for Toshiba series HDDs - Modify the toolbar icon of main interface - Revise the family selection panel. Add power control button and re-identify HDD button - Fixed the bug of power lights - Optimization of Smart function, combined the strong removal of Smart function Western Digital, Version: 2.2.2.9 - Add loading support of 5C module - Add creating LDR. Add one click load LDR function - Add supporting new families:Giant，Kojn_Re，Trailxls，Diablo 3S - Optmiize search function. Improve search length. Revise positioning wrong place when searching to the same module address - Add to support ROM Head bitmap editing of new HDD - Optimize test mode. Slove defects address problem and cumulative number problem. Add new loading LDR method - Revise loading LDR log error - Revise the problem of searching head 1 is not completely Samsung, version: 1.0.1.0 - Add loading resources function - Add defect list editing function. It can add S, A, D, T lists to translator to edit - Add A list to S list, and S list log report - Optimize clearing SMART function. Slove the problem of clearing SMART not completely - Slove the problem of not supporting some HDDs to write ROM - Revise editing defect list. Slove the problem of LBA type of files can not be added May 28th 2014 MRT Pro 140528, version: 2.0.3.4 Toshiba,version: 1.0.2.0 - Comprehensive optimization of CHS editor (P-List editor), including the optimization of the P-List to write, to increase the senior editor function, increase the import P-List function. - Comprehensive revisions shielding head and shielding Dan function, support multiple shielding, regional Dan shield (with B5 module of the HDD) and the area of Dan shield. - Optimization of create bitmap head function, support algorithm separately head with B5 module. April 24th 2014 MRT Pro 0424 version Data Explorer， version：2.1.0.3 - Change default name when create task - Add scan MFT, FAT, ExFAT functions - Add the option of automatically delete files which save fail - Optimize some details WD module, version：2.2.2.7 - Revise search the Bug of SA area - Optimize recover write ROM function - Repair many Bugs April 9th 2014 MRT Pro 0409 version, main program version number：2.0.3.4 - Add power lock and hard reset lock, avoid interrupt power when heat exchange Database manage tools, upgrade:1.0.0.4 - Add select files dialog box WD module, upgrade to: 2.2.2.6 - The overall offset of microcode, add database function, add generate ROM option - After adding search module, it will save the searched module lists to 01.RPM - Add revising firmware version (in edit ID function) - Add recovering write ROM function Samsung module, upgrade to：1.0.0.8 - Add edit ID function - Add editing zone table and zone table reporting function - Add MANGE 2.5'' series separate head support Seagate F3 module, upgrade to：1.1.1.0 - Add edit HDD ID, support the latest families of 7200.12 and above ST U5 module, upgrade to：1.0.1.5 - Add defect table edit function - Add factory program serial data copy function - Add open self calibration function Data Explorer，upgrade to：2.1.0.2 - Add initialization option, allow ATA device open task in case of no source disk - Add read only work module, in this module, it only read target device data - File system add pause, automatically skip function - Add mark, image zone effective data function - Add the related settings of file browse parameter - Revise some bugs and optimize small details - Notice: after upgrade DE, task parameter files are incompatible Hitachi-IBM ，upgrade to version：2.0.1.6 - Optimize Hitachi-IBM head testing arithmetic, the result is more accurate - Strengthen Hitachi-IBM 3.5'' clear password function Hitachi-ARM ，upgrade to version：1.0.1.3 - Add database support - Batch read module, add assemble way and select specify Copy way as well as whether to ignore read errors - Integrate 2.5' and 3.5' virtual translator, provide various virtual ways for users to choose, solve the problem of loading fail from files - Factory program copy support 2.5' and 3.5' HDDs at the same time, it can automatically rebuild translator and support the operations of hard reset and interrupt power, we suggest users select loading from files, in this way it can reduce the visit times of disk. Toshiba, upgrade to version：1.0.0.9 -Add database support -Solve the problem of “CP module can’t read” when some HDDs kill zone and kill head, provide two ways of “calculation method” and “detection method” for users to choose Feb 25th 2014 MRT Pro 0225 version, main program version NO.2.0.2.4 - The directory configuration of users is stored in registries; reset MRT will not lose it. - Update MRT token card driver program. Please install the newest drive when you run Driver Setup. exe. Data base administration tools, upgrade to: 1.0.0.2:1.0.0.2 - Add administration core of data base files contents; reduce much set-up time of content index and data base files contents. - Notes: When there is not content index file DbConfig.mdb in user configuration folder, the program would rebuild it automatically according to the data base files. - If the data base is large and need long time to waiting, after creating it, it will take less time when you visit data base next time. Western Digital module, upgrade to：2.2.2.5 - Add kill head tools - Add new family support：Tresselb，Shrek LT，Shrek - Repair the problem of inconvenient to write ROM in last version - Optimized the function of full backup resources, add assortment details. Samsung module, update to：1.0.0.7 - Add write ROM function Scanning module, update to：1.0.0.8 - Repair the bug of reverse scan breakdown now and then - Add S.M.A.R.T information viewer - Add Device ID viewer - Optimization specific, make it more convenient ST U5 module, the initial version：1.0.0.5 - The initial version, supporting the Seagate hard disk before the 10th generation. - ST U5 series terminal specially and the shortcut menu of common terminal command - The conservation and loading of LER - Hard disk resource view editor - Service area track back-up and write back - List and edit service area resource object TOSHIBA module, update to 1.0.0.8 - Optimized the function of clear P List - Add the function of head test - Add the function of kill head - Add the function of kill zone - New family：26GAC、34GAX、36GAC、50GACE、65GSXN、75GSX Hitachi-IBM ，update to version：2.0.1.5 - Optimized the diagnoses module - Add data base support - SA structure testing adds select test head function - SA structure testing adds detail test reporting function Hitachi-ARM ，update to version：1.0.1.2 - Optimized virtual translator function - Optimized the function of clear password, solve the problem of hard to clear password of some series - Add edit HDD configuration information function - Add the support for some new Toshiba HDDs in the market (use Hitachi- ARM technology) Maxtor ，update to version：1.0.0.3 - Optimized read and write module in batch function - Optimized read and write tracks in batch function Data Explorer ， update to：2.1.0.1 - Add file system, support NTFS、FAT、ExFAT - Revise action model of fill in data after read fail - Revise action model of modify MBR function - Revise several other details March 3rd 2013 MRT Pro 1203 version, main program version number：2.0.1.2 - Optimize database support WD module, upgrade to：2.2.2.4 - Add new family Tahoe PL - Support database application overall (include backup ROM, ROM module, loading LDR and so on) - Revise bug of diagnose module in version 2.2.2.3 Samsung module, upgrade to：1.0.0.6 - Support use database to backup ROM Toshiba module, upgrade to 1.0.0.7 - Add clear S.M.A.R.T forcefully; support most HDDs of 1.8' - Strengthen the function of P-list edit Seagate F3 module, version：1.1.0.1 - Add separate head support of HDDs with 4K technology November 17th 2013 MRT Pro 1117 version, main program version number：2.0.1.1 - Add database support, is compatible with database of PC3000 UDMA - Revise power switch shortcut, F11: on, F12: off Data Explorer (beta version) 2.1.0.0 - Add task plan function - Add automatic shut down function - Add mark bitmap function - Add lba value conversion function - Add automatic test 4k HDDs - Add data scan function when copying - Add task parameter of scan type - Add continuous reading function of sector editor - Add automatic skip block strategy when separate copy - Add factory program read small progress bar - Revise the judge of scan color block - Revise task statistics and progress statistics - Revise virtual disk, identify USB device - Revise factory program sometimes can't quit after reading - Revise some other action module and small bug - Notice: New DE task file is incompatible with last version ROM programmer tools, version: 1.0.0.3 - Add the support for SST series Flash ROM chip Database manage tools, initial version: 1.0.0.1 - Support view and edit data in database - Support adds, delete, revise and check database folder and files by this manage tools - Support lead out and lead in database files in batch - Compatible with UDMA database (change UDMA database name into: MrtSource.fdb, put it into MRT user's folder and then you can use it) WD module, upgrade to：2.2.2.3 - Support new series ROM directory activate judgment - Add virtual memory diagnose tools - Add database supporting, you can use database to save, get, view and edit firmware resource - Add new family support：Hubble LT，Fblite，Sadle 2D，Shreklt，Tresxls - Diagnose model adds memory diagnose processes, optimize the way of add defects, suppuration is widely and more convenient - Optimize the edition of memory head bitmap, humanization design Samsung module, upgrade to：1.0.0.5 - Add database supporting, you can use database to save, get, view and edit firmware resource Hitachi-IBM ，upgrade to 2.0.1.4 - Diagnose model adds the function of automatically repair damaged key module - Change head test arithmetic, testing result is more accuracy - Add the function of 3.5'' HDD calibrate NV-RAM enter address - Perfect the function of SA overall offset Hitachi-ARM ，upgrade to 1.0.1.1 - Virtual translator adds the function of automatically repair damaged module function - Adjust clear password function Seagate F3 module, version：1.1.0.0 - Revise ROM read and write function in Boot code model. Read and write ROM needn't short circuit - Add full-automatic translator recover tools - Add support for “MRT brush method” September 30th 2013 MRT Pro 0930 version, main program version number：2.0.1.0 - New architecture data recovery tools: MRT Data Explorer (beta) - Add power switch shortcut keys, F10: on, F11: off Data Explorer beta version 2.0.9.28 - Rewrite code, add many humanization designs, and improve serviceability - Greatly accelerate the speed of clear bitmap and re-statistics bitmap - Add search bitmap, statistics bitmap block, view head bitmap block functions - Add actual time display copy Hex data and copy speed curve functions - Add the option of select copy type when copy again - Add the support for 4K HDD feature - Add fast copy function Data Recoverer, version: 1.0.5.33 - Bug repair: revise repeat display problem when read fail and read overtime Seagate F3 module, version：1.0.0.9 - Change the name of “change head auxiliary tools” to “change ROM auxiliary tools” Samsung module upgrade to：1.0.0.4 - Add read ROM function - Optimize program core WD module, upgrade to：2.2.2.2 - Optimize diagnose module processes - Optimize read and write function and stop logic - Optimize module offset function - Add separate head read and write function of multi heads - Add new families Hitachi-IBM, upgrade to 2.0.1.3 - Add diagnose module - Add 2.5'' generate NV-RAM function - Add 3.5'' HDDs edit HDD ID function - Add 3.5'' HDDs edit NV-RAM function - Add 3.5'' HDDs NV-RAM calibration function - Revise view refurbish function in NV-RAM Hitachi-ARM, upgrade to 1.0.1.0 - Strengthen read and write NV-RAM function - Revise edit NV-RAM function - Revise view refurbish and write back function in RAM - Strengthen 2.5'' HDDs virtual translator function - Virtual translator of 2.5'' HDDs support more models - Deciphering function support more HDDs Maxtor module, upgrade to 1.0.0.2 - Add view P-list function - Add view G-list function - Add the function of generate LDR from resource file - Add SA structure test - Add view track function - Add hardware separate head function - Add initialize SRV, DISK, RCT, FMTI module functions - Strengthen edit HDD ID function August 10th 2013 MRT Pro 0810 version, main program version number：2.0.0.9 - Add Samsung HDDs repair module Data Recoverer, version: 1.0.5.31 - Bug revise: terminate task, change the bug of DRQ lamp light all the time after reading way - Perfect function: add skip LBA prompt when copy again - Perfect function: tree root directory in file launch interface adds display HDD serial number and version number Seagate F3 module, version：1.0.0.9 - Add P list checkout function - Add ROM read out and write function, support many series - Add repair disk tools, can repair red and green block bad tracks - Add change head auxiliary tools (beta version) Add Samsung module, initial version：1.0.0.3 - Support almost all 2.5, 3.5 SATA interface HDDs, support most 3.5 IDE interface HDDs - Support DR separate copy function - Add module list page, module HEX editor, users' sector viewer, HDD resource viewer - Add use ATA read and write module, read and write module in batch - Add terminal repair common failing "LED 1Axxx" function - Add terminal soft reset, terminal hard reset function - Add clear ALIST function - Add clear SMART function - Add clear password function Fujitsu module, upgrade to：1.0.0.4 - Revise HDD deciphering function, repair the problem of can't decipher - Revise the problem of serial port restore to default setting incorrect Scan program module, upgrade to1.0.0.4 - Add the option of putting the skipped sectors when meet bad blocks into defects table files when scanning - Optimize multi functions Hitachi-IBM, upgrade to 2.0.1.2 - Add generate ZONE function - Add quick view NV-RAM function - Add the function of load NV-RAM from files Hitachi-ARM, upgrade to 1.0.0.9 - Add quick view NV-RAM function - Add the function of load NV-RAM from files Maxtor module, upgrade to 1.0.0.1 - Add family identification function - Add generate LDR function - Add load LDR function - Add force boot HDD function - Add repair key module function - Add edit HDD ID function Flash ROM programmer module, upgrade to 1.0.0.2 - Add the support for AT25F512A chip in Seagate HDDs before 10 generation - Add read and write instruction setting, for unknown chip, users can refer handbook to set read and write order set July 15th 2013 MRT Pro 0715 version, main program version number：2.0.0.8 - Add Maxtor HDD repair module - Rewrite disk scan program of new version, the old version is saved temporary Data Recoverer, version: 1.0.5.31 - Repair the bug of forbidden disable read look-ahead in parameter setting Scan program module, rewrite version：1.0.0.3 - Rewrite scan program core, optimize multi designs - Add UDMA read and write scan function - Add scan save defects function and LBA defects editor - Optimize safety erase and quick erase functions - Add reverse scan function, user-defined scan the color of color block and save function as well as right key copy scan color block address function WD module, upgrade to：2.2.2.1 - Add online ARCO calibration function - Add offline ARCO calibration function; enrich edit function of 28 module calibration script, such as new built, loading, save and so on - In the diagnose processes of diagnose model, add common error repaired operation, optimize diagnose processes - Optimize the function of write track files, make it supports xx_FF.trk track files - Repair the problem of can't detect the first family in panel board, solve the problem of test abnormal in minority families such as Tornado Fujitsu module, upgrade to：1.0.0.2 - Add HDD deciphering function, it can clear HDD password Hitachi-IBM module, upgrade to：2.0.1.1 - Revise SA overall offset function - Adjust "view NV-RAM" shortcut - Solve the problem of the sudden failure of tool bar Hitachi-ARM module, upgrade to：1.0.0.8 - Adjust "view NV-RAM" shortcut Add Maxtor module, initial version：1.0.0.0 - Provide Maxtor HDD common repair functions May 28th 2013 MRT Pro 0528 version, main program version number：2.0.0.7 - Add the support for expand toolset Seagate module, version：1.0.0.8 - Solve the problem of HDD first ready after a long busy - Add display SMP Dbl address WD module, upgrade to：2.2.2.0 - Add new deciphering way - Add optional module detection - Add the function of microcode overall offset and replace - Add the function of formatting firmware area tracks - Add format SA and format SA function with repair SA translator - Add new family DF4 4KLT, solve the problem of several families test abnormal - Optimize diagnose model Hitachi-IBM, version：2.0.1.0 -Solve the problem of Hex editor tool bar title display wrong - Revise some series SA enter address is wrong - Add the function of search User data enter address Hitachi-ARM, version：1.0.0.7 - Solve the problem of Hex editor tool bar title display wrong - Add HDD deciphering function - Solve the bug of edit NV-RAM program breakdown - Add the function of repair the former after the bad after 2.5' HDD change head April 23rd 2013 MRT Pro 0423 version, main program version：2.0.0.6 Hitachi-IBM module, upgrade to：2.0.0.8 - Repair calibrate NV-RAM enter address wrong - Revise SA overall offset - Revise the problem of breakdown when kill head April 15th 2013 MRT Pro 0415 version, main program version：2.0.0.6 Hitachi-IBM module, upgrade to：2.0.0.7 - Repair the problem of display edit HDD ID wrong - Add logic scan - Add the function of formatting record defects - Add edit defects function - Revise edit G-List function WD module, upgrade to: 2.2.1.8 (April 15th) - Add logic scan test and add into defects table functions - Add edit defects table function - Add the function of module address offset and right key menu of module lists - Improve diagnose model process, add read and write test of ID mode - Solve more problems of family automatic testing - Add new families: Jamaica 4KV, Hubble, Firebird, Trails, Tressels - Improve the function of generate ROM and solve the bug of generate 47 module breakdown - Add the function of setting current execute item in edit 28 script - Solve the breakdown point of edit P list, G list and so on, Bug Toshiba module, upgrade to：1.0.0.5 - Add the function of virtual translator; it can be used to read factory module data of DR Seagate module, upgrade to：1.0.0.7 - Add the select interface of family series - Add Boot Code tools; it can be used to read and write Flash ROM April 2nd 2013 MRT Pro 0402 version, main program version：2.0.0.5 Data Recoverer, version: 1.0.5.30 - Bug repair: the breakdown of users cancel and then quit when breakdown HDD separate head - Bug repair: task file is easy to damage - Bug repair: system breakdown when launch FAT32 file - Bug repair: source/target device conflict - Bug repair: certain probability breakdown of program when recalculate bitmap - Bug repair: sector editor load file breakdown - Add skip option when scan again Hitachi-IBM module, upgrade to ：2.0.0.6 - Repair display items incorrectly when edit SA enter address in NV-RAM - Revise the abnormal function of calibrate NV-RAM enter address, it maybe a cycle of death in the process of calibration - Revise promote users if they short circuit PCB board, it may lead head hang up in the condition of not interrupt power in the process of clear password. After revising, the program will power off automatically and then promote users to short circuit PCB board, after connect PCB board, it will power on automatically. - Revise formatting function - Add SA overall offset Hitachi-ARM module, upgrade to：1.0.0.5 - Revise notebook HDD display error when edit NV-RAM - Revise formatting function WD module, upgrade to：2.2.1.3 - Add 2 new methods to “load LDR” and improved diagnose model - Add new family： Tahoe XL - Add new function: kill zone - Head test improved that default fill as safety track and testing - Default select effective track when backup track, which make backup resource more convenient - Strengthen edit defect table function; optimize the arithmetic of sort out defect table items - Revise G list not be emptied after G list to P list - Solve the problem of small part of families can't be test normally Toshiba module, upgrade to：1.0.0.4 -Add the function of edit P list -Add the function of edit G list -Add defect editor, can add into P list or G list by hand -Add disk scan program, can scan disk defect and put bad sectors into defect table March 11th 2013 MRT Pro 0311 version, main program version：2.0.0.4 MRT Pro 0311 version, main program version: 1.0.5.23 - Bug repair (urgent): task file damage when quit task - Bug repair: it may delete task file when running - Bug repair: launch file system throw untreated exception - Bug repair: it is hang up click by right key of mouse when use factory program launch file system and throw untreated exception - Bug repair: it is hang up when lead out FAT32 file system data - Bug repair: users cancel and quit program breakdown when build new task Hitachi module, version：2.0.0.5 1. Kill head supports 424 series 2. Revise formatting operation 3. Revise the bug of load defect table program from file breakdown 4. Adjust the plan of SA structure testing 5. Revise the function of load LDR function; it needs to interrupt power by hand after finishing load WD module, upgrade to：2.2.1.2 - Revise the bug of some family can't test automatically - Revise the bug of ROM doesn't save in ROM folder - Revise the bug of some HDD's ROM directory list can't display normally - Strengthen the function of rebuild ROM from SA - Add read data by track and test SA structure - Further strengthen the function of search SA module, add search module from ABA - Strength diagnose model, extend its support - Add new family：DIABL03D Seagate module - Add PBA transfer tools - Translator repair tools add the support for 4K technology HDDs February 15th 2013 MRT Pro 0215 version, main program version number:2.0.0.3 - Replace icon of application program Data Recoverer, version: 1.0.5.17 - Improve image, it can image source device into single unit file, unit file size is equal to source device size rather than default size - Add skip in reverse copy - Add handle DWF - Repair bug Add ROM programmer tools, version：1.0.0.1 - Provide the function of basic ROM chip programming unit WD module, version：2.2.1.0 - Repair some problems Hitachi module, version：2.0.0.4 - Repair some problems Toshiba module, version：1.0.0.3 - Add the support for MQ01ABD series - Add the option of prior read and write ATA, support some HDDs January 17th 2013 MRT Pro 0117 version -Add online version Data Recoverer - Add switch heads quickly - Repair bug WDC module -L board series modules add the support for more series Seagate module -Add read sector function in factory CHS way Hitachi module -Repair many bugs January 9th 2013 MRT Pro 0109 version, main program version number: 2.0.0.0 - Add the support for IDE interface Data Recoverer, version: 1.0.2.1 - Strengthen the stability of target device - Add files system browser skip files function - Repair many bugs Seagate module, version：1.0.0.4 - Repair the problem of can't display track list of some 4K technology HDDs - Add the setting of terminal serial port write in Hitachi module, version：2.0.0.3 - Redesign Hitachi module, solve some problems of old version - Support kills head better Hitachi ARM module, version：1.0.0.4 - Hitachi ARM module accumulate update WD L board series module, version：2.0.0.1 - Add new module, support older WD L board series HDDs November 29th 2012 MRT Aple 1129 version, main program version number Data Recoverer, version: 1.0.1.7 - Revise the problem of hang up when new-built task in 1.0.1.6 version - Revise handling of the file name is too long - Attention: at present DR version has the bug of confuse 0 head and non separate head area when copy separate, we will solve it in next upgrade. November 14th 2012 Data Recoverer, version: 1.0.1.6 - Revise a problem in booting WD module, version：1.0.0.5 - Revise the problem of LBA in 53 series display 0 November 13th 2012 MRT Aple 1113 version, main program version number:1.3.0.0 Data Recoverer, version: 1.0.1.5 - Strengthen the stability of file system browser - Add mark option for file system browser element - Add effective data image of file system browser Add Hitachi-IBM, beta, version 1.0.0.1 - As for new Hitachi module version, Hitachi-IBM beta version provides the function of handles Hitachi HDDs' firmware WD module, upgrade to 1.0.0.4 - Add edit RAM head bitmap function October 31st 2012 MRT Aple 1031 version, main program version number:1.2.0.0 Data Recoverer, version: 1.0.0.4 - Strengthen the stability of file system browser - Revise the bug of separate head and reverse copy - Revise the bug of open task fail by the way of MRT IMAGE - Revise the bug of tool bar update invalid - Add revise MBR option of target device is system physical disk when new-built task Add Fujitsu module initial version, version number 1.0.0.1 - It has common functions of Fujitsu module. WD module, upgrade to 1.0.0.3 - Add generate 03 module function Hitachi-ARM, upgrade to 1.0.0.2 -Strengthen the function of "virtual translator" -Strengthen "load LDR function" Toshiba module, upgrade to 1.0.0.1 -Add checkout functions of CP module and P list -Add clear P list function -Add separate head function -Add read and write tracks Seagate module, upgrade to 1.0.0.3 - Add the function of clear non-resident defect table - Add repair translator function - Add testing physical sector function - Add read and write functions of SA ABA address October 5th 2012 MRT Aple 105 version, main program version number:1.1.0.0 Data Recoverer, version: 1.0.0.3 - Revise the bug of the task is terminated when host standby in Win7 system - Revise select device again when build or open task fail - Revise the bug of locate again after change head option - Add image method of MRT FILE - Add fill options of corresponding target device when handle source device bad tracks - Add automatic save log - Add right key menu option of bitmap - Add shortcut address frame of sector editor and load/save sector files - Revise abnormal when quit task - Revise many abnormities of file system browser, strengthen stability - Revise the bug when file system browser "stop" and add "pause" order - Improve file system browser view - Add the shortcut key of file system browser and sort file/folder (similar to windows resource manager) - Add the support of put file/folder to local Add Toshiba module initial version, version number 0.0.0.9 - It has common functions of Toshiba module Add Hitachi-ARM, version number 1.0.0.1 - It has functions of Hitachi ARM series August 17th 2012 MRT Aple 817 version, main program version number:1.0.0.2 Data Recoverer, version: 1.0.0.2 - Strengthen stability of disk image - Revise bug when task initialized - Revise the bug of order model can't recover automatically after opening task again - Revise manage power better in factory model - Add use factory model build task - Revise the bug of interface is not refurbished after separate head in task parameter attribute page - Revise the bug of slow speed when scan again - Revise the bug of lost speed information when imaging - Revise the bug of sector editor write in target device invalid - Add clear bitmap menu - Revise the bug of can't stop when leading in files Hitachi-IBM, upgrade to 1.0.0.2 - Revise the function of realize "calibrate enter address" - Add load LDR function - Add display default module when module list loading fail Disk scan tools, upgrade to 1.0.0.2 - Add format disk, quick erase - Revise hang up problem when scanned HDD has lots of bad tracks Seagate module, upgrade to 1.0.0.2 - Add SA track testing, put LBA into defect table, revise the solution of the former after the bad - Add write in separate zone function when write tracks WD module, upgrade to 1.0.0.2 -Revise boot interface, revise ROM 0A module checkout arithmetic - Revise diagnose model, add loading LDR 01 module Add Samsung module initial version, version number0.0.0.1 - It has terminal and clear SMART function Main program, upgrade to 1.0.0.2 - Add information display of status lamp current interface July 20th 2012 MRT Aple 720 initialized version, version number:1.0.0.1 Complete version includes common module, DR module, WD module, Seagate module and Hitachi module, totally 5 modules. Common module provides scan disk, view SMART, view HDD information, cut and paste capacity, safety subsystem and other functions. DR module includes functions of high speed copy disk; analyze file system and so on. Other module is professional tools corresponding to HDD brand. This version is initial version. |
|